Concept explainers
At 220 m, the bungee jump at the Verzasca Dam in Locarno, Switzerland, is one of the highest jumps on record. The length of the elastic cord, which can be modeled as having negligible mass and obeying Hooke’s law, has to be precisely tailored to each jumper because the margin of error at the bottom of the dam is less than 10.0 m. Kristin prepares for her jump by first hanging at rest from a 10.0-m length of the cord and is observed to stretch the rope to a total length of 12.5 m. a. What length of cord should Kristin use for her jump to be exactly 220 m? b. What is the maximum acceleration she will experience during her jump?
(a)
The length of the cord required to jump exactly
Answer to Problem 75PQ
The length of the cord required to jump exactly
Explanation of Solution
Given that the length of the test cord is
Apply Hooke’s law to the rope. The stress on the rope is directly proportional to the strain.
Here,
The weight of the person acts as the stress and the strain in the stretching length of the rope. Thus, equation (I) can be modified and solved for
Here,
Since the stretch distance is
The force constant for a longer cord is smaller and must depend inversely on the length of the cord For a length
Equation (IV) can be used as a general expression for the force constant of the given cord of any length
Apply the law of conservation of energy at the top (initial condition) and bottom (final condition) of the drop.
Here,
Write the general expression for the gravitational potential energy.
Here,
Write the general expression for the elastic potential energy.
The initial and final kinetic energy of the person is zero. Moreover, the initial elastic potential energy is also zero. Thus, equation (V) can be modified using equations (VI) and (VII).
Here,
Use equation (IV) in (VII).
Since the total height of jump is
Conclusion:
Use equation (IX) in (VIII) along with substituting
Solve the quadratic equation (X).
Only the length which is less than
Therefore, the length of the cord required to jump exactly
(b)
The maximum acceleration that the person experiences during the bungee jump.
Answer to Problem 75PQ
The maximum acceleration that the person experiences during the bungee jump is
Explanation of Solution
It is obtained that the length of the cord is
During bungee jumping, the forces on the person are the gravitational force acting downward and the elastic restoring force acting upward. The total force acting on the person will be the difference of these two forces.
Write the expression for the total force acting on the person during the jump.
Here,
Write the expression for the maximum stretched distance for the given cord.
Use Newton’s second law and equation (XII) to modify equation (XI).
Here,
Use equation (IV) in equation (XIII) and solve for
Conclusion:
Substitute
Therefore, the maximum acceleration that the person experiences during the bungee jump is
Want to see more full solutions like this?
Chapter 8 Solutions
Physics for Scientists and Engineers: Foundations and Connections
- A block is placed on top of a vertical spring, and the spring compresses. Figure P8.24 depicts a moment in time when the spring is compressed by an amount h. a. To calculate the change in the gravitational and elastic potential energies, what must be included in the system? b. Find an expression for the change in the systems potential energy in terms of the parameters shown in Figure P8.24. c. If m = 0.865 kg and k = 125 N/m, find the change in the systems potential energy when the blocks displacement is h = 0.0650 m, relative to its initial position. FIGURE P8.24arrow_forwardIf the net work done by external forces on a particle is zero, which of the following statements about the particle must be true? (a) Its velocity is zero. (b) Its velocity is decreased. (c) Its velocity is unchanged. (d) Its speed is unchanged. (e) More information is needed.arrow_forwardEstimate the kinetic energy of the following: a. An ant walking across the kitchen floor b. A baseball thrown by a professional pitcher c. A car on the highway d. A large truck on the highwayarrow_forward
- An intrepid physics student decides to try bungee jumping. She obtains a cord that is 9.00 m long and has a spring constant of 5.00 102 N/m. When fully suited, she has a mass of 70.0 kg. She looks for a bridge to which she can tie the cord and step off. Determine the minimum height of the bridge that will allow her to stay dry (that is, so that she stops just before hitting the water below). Assume air resistance is negligible.arrow_forwardA block of mass 0.500 kg is pushed against a horizontal spring of negligible mass until the spring is compressed a distance x (Fig. P7.79). The force constant of the spring is 450 N/m. When it is released, the block travels along a frictionless, horizontal surface to point , the bottom of a vertical circular track of radius R = 1.00 m, and continues to move up the track. The blocks speed at the bottom of the track is = 12.0 m/s, and the block experiences an average friction force of 7.00 N while sliding up the track. (a) What is x? (b) If the block were to reach the top of the track, what would be its speed at that point? (c) Does the block actually reach the top of the track, or does it fall off before reaching the top?arrow_forwardWhen a 4.00-kg object is hung vertically on a certain light spring that obeys Hookes law, the spring stretches 2.50 cm. If the 4.00-kg object is removed, (a) how far will the spring stretch if a 1.50-kg block is hung on it? (b) How much work must an external agent do to stretch the same spring 4.00 cm from its unstretched position?arrow_forward
- An athlete jumping vertically on a trampoline leaves the surface with a velocity of 8.5 m/s upward. What maximum height does she reach? (a) 13 m (b) 2.3 m (c) 3.7 m (d) 0.27 m (e) The answer cant be determined because the mass of the athlete isnt given.arrow_forwardThe hill is covered in gravel so that the truck's wheels will slide up the hill instead of rolling up the hill. The coefficient of kinetic friction between the tires and the gravel is μk. This design has a spring at the top of the ramp that will help to stop the trucks. This spring is located at height h. The spring will compress until the truck stops, and then a latch will keep the spring from decompressing (stretching back out). The spring can compress a maximum distance x because of the latching mechanism. Your job is to determine how strong the spring must be. In other words, you need to find the spring constant so that a truck of mass mt, moving at an initial speed of v0, will be stopped. For this problem, it is easiest to define the system such that it contains everything: Earth, hill, truck, gravel, spring, etc. In all of the following questions, the initial configuration is the truck moving with a speed of v0 on the level ground, and the final configuration is the truck stopped…arrow_forwardTendons. Tendons are strong elastic fibers that attach muscles to bones. To a reasonable approximation, they obey Hooke’s law. In laboratory tests on a particular tendon, it was found that, when a 250 g object was hung from it, the tendon stretched 1.23 cm. (a) Find the force constant of this tendon in N/m. (b) Because of its thickness, the maximum tension this tendon can support without rupturing is 138 N. By how much can the tendon stretch without rupturing, and how much energy is stored in it at that point?arrow_forward
- Tendons. Tendons are strong elastic fibers that attach muscles to bones. To a reasonable approximation, they obey Hooke’s law. In laboratory tests on a particular tendon, it was found that, when a 248-g object was hung from it, the tendon stretched 1.22 cm. (a) Find the force constant of this tendon in N/m. (b) Because of its thickness, the maximum tension this tendon can support without rupturing is 140 N. By how much can the tendon stretch without rupturing, and how much energy is stored in it at that point? Draw free-body diagram.arrow_forwardA horizontal spring with spring constant 290 N/m is compressed by 15 cm and then used to launch a 300 g box across the floor. The coefficient of kinetic friction between the box and the floor is 0.23. What is the box's launch speed? Express your answer with the appropriate units.arrow_forwardA small block is sent through point A with a speed of 12.9 m / s . Its path is without friction until it reaches the section of length L , where frictional force stops the block . The coefficient of kinetic friction is 0.70 . The indicated heights are hy = 19.1 m and h2 = 2.9 m . What is L ( in m ) ?arrow_forward
- Physics for Scientists and Engineers: Foundations...PhysicsISBN:9781133939146Author:Katz, Debora M.Publisher:Cengage LearningPrinciples of Physics: A Calculus-Based TextPhysicsISBN:9781133104261Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningClassical Dynamics of Particles and SystemsPhysicsISBN:9780534408961Author:Stephen T. Thornton, Jerry B. MarionPublisher:Cengage Learning
- College PhysicsPhysicsISBN:9781285737027Author:Raymond A. Serway, Chris VuillePublisher:Cengage LearningCollege PhysicsPhysicsISBN:9781305952300Author:Raymond A. Serway, Chris VuillePublisher:Cengage Learning