Calculate the equivalent resistance R ab across the terminals a-b without using PSPICE for circuit in the given Figure

Combination of Resistors deals with the equal current in series connection and equal current in parallel connection. Ture or False

Some solar modules are connected together to form a solar array producing a total voltage of 9V and a current of 1.5A. If each solar module produces 4.5V and 0.5A then what must be the correct arrangement in that array? Connect 2 solar modules in series with 2 strings in parallel Connect 2 solar modules in series with 3 strings in parallel Connect 3 solar modules in series with 3 strings in parallel Connect 3 solar modules in series with 2 strings in parallel

SECTION 5-6 Kirchhoff's Voltage Law 32. The following voltage drops are measured across three resistors in series: 5.5 V, 8.2 V, and 12.3 V. What is the value of the source voltage to which these resistors are connected? 33. Five resistors are in series with a 20 V source. The voltage drops across four of the resistors are 1.5 V, 5.5 V, 3 V, and 6 V. How much voltage is dropped across the fifth resistor? 34. Determine the unspecified voltage drop(s) in each circuit of Figure 5-78. Show how to connect a voltmeter to measure cach unknown voltage drop. ► FIGURE 5-78 2 V V2 3.2 V 8 V R 15 VE 2R 0.5 V 1.5 V 4 R 3R (b)

Reduce the circuit to a single current source with a resistor in parallel

6. When using superposition, what is the ideal internal resistance of a current source? Short circuit The source voltage divided by the source resistance The source voltage divided by the load resistance Infinite resistance

the source current through R1 is 6.34 mA. use current divider to determine how much current goes through R5 and R6

Obtain the equivalent resistance at the terminals a-b for each of the circuits using delta to y or star or both

Final section options are between maximum power point theory, voltage divider, kirchhoff's voltage law or current divider