Titanium dioxide, which is the most common white pigment in paint, can be produced from the titanium mineral, rutile, by chlorination to TiCl4, followed by oxidation to TiO2. To purify the insoluble titanium dioxide, it is washed free of soluble impurities in a continuous, countercurrent system of thickeners with water. Two hundred thousand kg/h of 99.9 wt% titanium dioxide pigment is to be produced by washing, followed by filtering and drying. The feed contains 50 wt% TiO2, 20 wt% soluble salts and 30 wt% water. The wash liquid is pure water at a flow rate equal to that of the feed on a mass flow basis .Determine the number of ideal stages using the McCabe-Smith method. kg solute/kg solution kg solution/kg TiO2 0.0 0.30 0.2 0.34 0.4 0.38 0.6 0.42

Titanium dioxide, which is the most common white pigment in paint, can be produced from the titanium mineral, rutile, by chlorination to TiCl4, followed by oxidation to TiO2. To purify the insoluble titanium dioxide, it is washed free of soluble impurities in a continuous, countercurrent system of thickeners with water. Two hundred thousand kg/h of 99.9 wt% titanium dioxide pigment is to be produced by washing, followed by filtering and drying. The feed contains 50 wt% TiO2, 20 wt% soluble salts and 30 wt% water. The wash liquid is pure water at a flow rate equal to that of the feed on a mass flow basis .Determine the number of ideal stages using the McCabe-Smith method. kg solute/kg solution kg solution/kg TiO2 0.0 0.30 0.2 0.34 0.4 0.38 0.6 0.42

Curren'S Math For Meds: Dosages & Sol

11th Edition

ISBN:9781305143531

Author:CURREN

Publisher:CURREN

Chapter21: Heparin Infusion Calculations

Section: Chapter Questions

Problem 1.3P

See similar textbooks

Similar questions

Cyclophosphamide, after reconstitution, has a concentration of 20 mg/mL. The patient, who weighs 67 kg and is 155 cm tall, is ordered cyclophosphamide in 250 mL NS. How many mL will be added to the bag?
Discuss the suitability of bromocresol green and thymol blue (2nd change only) for use as indicators in an acetic acid - sodium hydroxide titration. Paragraph в I A + v ...
Elemental gold is being recovered by electrodeposition from a solution with tiny amounts of Au(III). Holding other factors constant, what can be done to maximize the yield of recovered gold?
Quinoline is isolated from a reaction mixture by the process of steam distillation. A mixture of quinoline and water distils at a total pressure of 740 mm Hg at 98.96°C. The vapour pressure of water (Po) is 732.04 mm Hg at this temperature. What is the maximum number of grams of quinoline which can be distilled with a 1000g of watervapour under a pressure of 740 mm Hg.
The maximum allowable concentration of chloroform, CHCl3, in drinking water is 100 ppb. What is the maximum amount (in grams) of chloroform allowed in a glass containing 400 g (400 mL) of water?
The Ksp values of silver chromate Ag2CrO4 and silver iodate Ag(IO3) are given below. Ag2CrO4 Ag(IO3) Ksp 1.12 x 10-12 3.17 x 10-8 Based on these Ksp values, which of the following is true? Choose one option only. Options: a. In the solution consisting of 1.00 x10-4 M Ag+ and 5.00 x10-5 M CrO42-, Ag2CrO4 precipitate will form. b. In the solution consisting of 1.0 x10-4 M Ag+ and 1.0 x10-4 M IO3-, Ag(IO3) precipitate will form. c. In pure water, the solubility of Ag2CrO4 is lower than the solubility of Ag(IO3). d. In the solution consisting of 0.200 M CrO42- and 0.200 M IO3-, Ag2(CrO4) will precipitate first if we add Ag+ ions gradually into the above mixture.
You just made a 1.5M permanganate solution. What concentration is your potassium permanganate solution in percent? "K: 39.10 g/mole" "Mn: 54.94 g/mole" "O: 16 g/mole" "MW of KMnO4 is 158.04 g/mole" O a. 0.24% Ob. 20.1% O c. 15.8% O d. 23.7% O e. 2%
The decomposition reaction of atmospheric peroxyacetylnitrate (PAN) to products was studied, and the following rates were obtained. Temperature, °C Rate constant, s1 0.00 5.60 x 10-6 10.0 3.20 x 10-5 20.0 1.60 x 10 4 30.0 7.60 x 10-4 43. Fit this data into the Arrhenius equation. Give the values of the following: Slope = ( Select ) y-intercept = I Select] Pearson coefficient (R) = [ Select ] activation energy of this reaction in kJ/mol = [Select ] collision frequency factor A = I Select]
A 1.00 g sample containing NaHCO3 was dissolved in water and titrated using 0.500 M HCI. The sample solution required 12.5 mL of the titrant solution to reach endpoint. Assuming that only NaHCO3 reacts with HCl, how much of NaHCO3 is present in the sample? g
Tirofiban (C22H36N2O5S MWt = 440.6) is present as tirofiban HCI monohydrate MWt=495.1) at 0.281 mg/mL in a concentrated solution. (C22H36N2O5S.HCI.H₂O A solution for infusion is prepared by extracting 50 mL from a 250 mL bag of 5% glucose solution and adding 50 mL of concentrated solution. Sofia who weighs weighs 87 kg requires a tirofiban dose of 0.1 mcg/kg/min for 12 to 24 hours. What would the infusion rate be (mL/h)? (Answer to 1 decimal place.)
The decomposition reaction of atmospheric peroxyacetylnitrate (PAN) to products was studied, and the following rates were obtained. Temperature, °C Rate constant, s 1 0.00 5.60 x 10-6 10.0 3.20 x 10-5 20.0 1.60 × 10-4 30.0 7.60 x 10-4 43. Fit this data into the Arrhenius equation. Give the values of the following: Slope = [ Select] y-intercept = [Select] %3D
In kool aid chromatography, what factors affect the efficiency of the column? Also discuss the Van-Deemter equation.