The temperature of a gas stream is measured by a thermocouple whose junction can be approximated as a 1-mm-diameter sphere. Take the junction’s properties as: k of 32 W/m K, density of 8.2 kg/m^3, c of 300 J/Kg K. On its surface, the overall heat transfer coefficient is 200 W/m^2 K. Neglect any conduction loss from the sphere to other parts of the thermocouple. Create a plot of measurement error as a function of time for the thermocouple.

The temperature of a gas stream is measured by a thermocouple whose junction can be approximated as a 1-mm-diameter sphere. Take the junction’s properties as: k of 32 W/m K, density of 8.2 kg/m^3, c of 300 J/Kg K. On its surface, the overall heat transfer coefficient is 200 W/m^2 K. Neglect any conduction loss from the sphere to other parts of the thermocouple. Create a plot of measurement error as a function of time for the thermocouple.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter7: Forced Convection Inside Tubes And Ducts

Section: Chapter Questions

Problem 7.29P

See similar textbooks

Similar questions

The temperature of a gas stream is measured by a thermocouple whose junction can be approximated as a 1-mm-diameter sphere. Take the junction’s properties as: k of 32 W/m K, density of 8.2 kg/m^3, c of 300 J/Kg K. On its surface, the overall heat transfer coefficient is 200 W/m^2 K. Neglect any conduction loss from the sphere to other parts of the thermocouple. Create a plot of measurement error as a function of time for the thermocouple, expressed as a fraction of the initial temperature difference.
Q2/ An aluminum sphere weighting 7kg and initially at a temperature of 533K is suddenly immersed in a fluid at 283K. if heat transfer coefficient between the sphere and fluid is 50W/m?.°C. Take density=2707kg/m3, specific heat=0.9KJ/kg.°C and thermal conductivity= 204W/m °C. إجابت * Determine the Bi number 0.00696 0.000696 0.0052 0.00052 0 أخری *.Determine the time required to cool sphere to 263K 26.28min 262.8min 52.56 min 525.6 min O أخری
The temperature distribution across a wall 0.25 m thick at a certain instant of time is T(x) = a + bx + cx², where T is in degrees Celsius and x is in meters, a = 200 C, b = -200 C/m, and c = 30 C/m². The wall has a thermal conductivity of 2.5 W/m.K. (a) Determine the heat flux into and out of the wall (q"in and q'out). (b) If the cold surface is exposed to a fluid at 100 C, what is the convection coefficient h? - Degree Celsius 200°C q" In- q'in q'out= h = Choose... Choose.... Choose... L₂x K = 2.5 W/m.k T(x)-200-200 x +30x² q" Out 142.7 C 11 L=0.25 m Fluid Too = 100 °C h
How long should it take to boil an egg? Model the egg as a sphere with radius of 2.3 cm that has properties similar to water with a density of = 1000 kg/m3 and thermal conductivity of k = 0.606 Watts/(mC) and specific heat of c = 4182 J/(kg C). Suppose that an egg is fully cooked when the temperature at the center reaches 70 C. Initially the egg is taken out of the fridge at 4 C and placed in the boiling water at 100 C. Since the egg shell is very thin assume that it quickly reaches a temperature of 100 C. The protein in the egg effectively immobilizes the water so the heat conduction is purely conduction (no convection). Plot the temperature of the egg over time and use the data tooltip in MATLAB to make your conclusion on the time it takes to cook the egg in minutes.
Answer this ASAP The diameter of the tube is 25 mm. The specific heat of water is 4.18 kJ/kg.°C. The overall heat transfer coefficient is 0.7 kW/m².°C. 1. Schematic of temperature distribution 2.ΔTLMTD 3.Actual heat transfer rate 4.Cmin 5.Maximum heat transfer rate
A current of 200 A is passed through a stainless steel wire (k = 19 W/m.K) 3 mm in diameter. The resistivity of the steel is 70x10^(-6) ohm.cm, and the length of the wire is 1 m. The wire is submerged in a liquid at 383 K and experiences a convection heat transfer coefficient of 4 kW/m^2. K. The center temperature (in K) of the wire is
A composite plane wall consisting of materials, 1.5-in steel (k = 312 BTU-in/HR.ft2.0F) and 2-in aluminum (k = 1400 BTU-in/HR.ft2.0F), separates a hot gas at Ti = 2000F, hi = 2 BTU/HR.ft2.0F, from cold gas at To = 80 deg F, ho = 5. If the hot fluid is on the aluminum side, find: a) Transmittance, U; b) The heat through 100 sq. ft of the surface under steady state condition and c) The interface temperature at the junction of the metals.
Determine conductive resistance (in K/W) of a 80 m^2 plane wall composed of 2 layers: Layer 1: brick, thickness δ1 = 620 mm, thermal conductivity λ1 = 0.310 W/(m.K) Layer 2: EPS, thickness δ2 = 52 mm, thermal conductivity λ2 = 0.026 W/(m.K) Evaluate the heat loss through this wall if indoor temperature is 22 C and outdoor temperature is -18 C.
67 l all M O 2 o 9:05 the test.pdf Q1/ The thermal contact conductance at the interface of two 1.5-cm-thick copper plates is measured to be 19,000 W/m2 °C. Determine the thickness of the copper plate whose thermal resistance is equal to the thermal resistance of the interface between the plates. The thermal conductivity of copper k = 401 W/m-°C Q2/ A 4-m-internal-diameter spherical tank made of 1.75-cm-thick stainless steel (k 15 W/m °C) is used to store iced water at 0°C. The tank is located in a room whose temperature is 35°C. The walls of the room are also at 35°C. The outer surface of the tank is black, and heat transfer between the outer surface of the tank and the surroundings is by natural convection and radiation. The convection heat transfer coefficients at the inner and the outer surfaces of the tank are 80 W/m2 °C and 10 W/m2 °C, respectively. Determine (a) the rate of heat transfer to the iced water in the tank and (b) the amount of ice at 0°C that melts during a 1-h…
t = 30 + 0.9563 (62.2- 30) = 60.79°C (Ans.) Example 4.14. A very thin glass walled 3 mm diameter mercury thermometer is placed in a stream of air, where heat transfer coefficient is 55 W/m2°C, for measuring the unsteady temperature of air. Consider cylindrical thermometer bulb to consist of mercury only for which k and a = 0.0166 m2/h. Calculate the time required for the temperature change to reach half its final or, %3D 8.8 W/m C %3D value.
3 Brass cube "p = 8530 kg/m , c= side length =9 mm, are annealed by heating them first to 813°C in a furnace and then allowing them to cool slowly to 130°C in ambient air at 28°C. If the average heat transfer coefficient is 19.9 W/m .°C, If 2204 balls are to be annealed per hour, what is the total rate of heat transfer (watts) from the balls to the ambient air? 380 J/kg.°C, k = 110 W/m.°C, a = 33.9E-6 W/m.°C",
A 10 cm thick and 1 m wide long steel plate is immersed in an oil bath at T0=40°C when the temperature is T1=240 ° C. Heat transfer coefficient between plate and oil is h=600 W/m2K and p=7833 kg/m3 for steel, cp=465 J/kgK, k=43 W/mK, (alpha) = 1.2x10^(-5) m2/s. A) After how long the core temperature of the steel plate becomes 100 ° C. B) What is the temperature inside 3 cm from the surface of the steel plate happens. C) Within this period, per unit length plate what is the amount of heat that passes.