I need this answer the subject is dc machine Q2 (a) Two d.c. shunt generators Gl and G2,with ratings of 500 and 750 kW,66아6506405 630-620-Generator Arespectively, and having the voltage vs. perGenerator Bcent current external characteristics shownin figure below are connected in parallel.Calculate (i) the power output of each 590-generator and the total load when the 580-terminal voltage is 630 volts; (ii) the loaddelivered by generator G1 when generatorG2 is "floating"6001010203040809010050Per cent of rated current6070(34)

According to the question question we have find (i) output power of generator and total load (ii)…

Q2 (a) Two d.c. shunt generators Gl and G2, with ratings of 500 and 750 kW, respectively, and having the voltage vs. per cent current external characteristics shown 66아 650 64아 5 630- 620- 610t VeL 600 Calculate (i) the power output of each 590- generator and the total load when the 580- Generator A Generator B in figure below are connected in parallel. terminal voltage is 630 volts; (ii) the load delivered by generator G1 when generator G2 is "floating" 10 60 70 80 90 100 50 Per cent of rated current 10 20 30 40 (34)

Q2 (a) Two d.c. shunt generators Gl and G2, with ratings of 500 and 750 kW, respectively, and having the voltage vs. per cent current external characteristics shown 66아 650 64아 5 630- 620- 610t VeL 600 Calculate (i) the power output of each 590- generator and the total load when the 580- Generator A Generator B in figure below are connected in parallel. terminal voltage is 630 volts; (ii) the load delivered by generator G1 when generator G2 is "floating" 10 60 70 80 90 100 50 Per cent of rated current 10 20 30 40 (34)

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter3: Power Transformers

Section: Chapter Questions

Problem 3.31P

See similar textbooks

Similar questions

synchronous generator threewThe phases are rated at 1000 kVA and operate at a voltage of 6.6 kV. The product resistance per phase is 0.38 ohms and the leakage reactance is 0.5 ohms per phase. The generator works to provide full load at a power factor of 0.85 delayed and at normal voltages. Find the value of the no-load voltage.
A synchronous generator is rated 645 MVA, 24 kV, 0.9 pf lagging. It has a synchronous reactance 1.2 . The generator is feeding full load at 0.9 pf lagging at rated voltage. Calculate: (a) Excitation emf (E,) and power angle & (b) Reictive power drawn by the load Carry out calculations in pu form and convert the result to actual values.
2A. What is another term for "shunt"? a) in series b) in parallel c) compounded d) none of the above 2B. Which of the following is/are a basic type of DC generator connection? a) series b) shunt c) compound d) all of the above
The one-line diagram of a simple power system is shown in Figure below. The neutral of each generator is grounded through a current-limiting reactor of 0.25/3 per unit on a 100-MVA base. The system data expressed in per unit on a common 100-MVA base is tabulated below. The generators are running on no-load at their rated voltage and rated frequency with their emfs in phase. G Stark Item Base MVA Voltage Rating X' x² 20 kV 20 kV 20/220 kV 20/220 kV 100 0.05 0.15 0.15 0.10 0.10 220 kV 0.125 0.125 0.30 0.15 0.25 025 0.7125 0.15 100 100 0.15 0.05 0.10 0.10 0.10 100 0.10 100 100 Lu La 220 kV 0.15 220 kV 0.35 100 A balanced three-phase fault at bus 3 through a fault impedance Zf= jo.I per unit. The magnitude of the fault current in amperes in phase b for this fault is: Select one: A. 345.3 B. 820.1 C. 312500 3888888 产产

two alternators A and B having 5% speed regulation are working in parallel at a station. Alternator A is rated at 15 MW while B is at 20 MW. When the total load to be shared is 12 MW, then how much of the load will be shared by the alternator B?
b) Two synchronous generators, G2 and G2, are connected parallelly supplying a load. Generator G1 has a no-load frequency of 50.5 Hz and a slope of 300 MW/Hz. Generator G2 has a no-load frequency of 50.2 Hz and a slope of 500 MW/Hz. The load consumes 250 MW real power. (1) At what frequency does this system operate, and how much power is supplied by each of the two generators? (ii) An additional 100 MW load is added to this power system. What is the new system frequency, and how much power do G1 and G2 supply? (iii) The governor set point of G2 is changed to control system frequency back to 50 Hz. Determine the G2 governor set point.
Q2 Two three-phase, 6.6 kV, Y-connected synchronous generators are operating in parallel to supply a load of 3000 kW at 0.8 power factor lagging. The synchronous reactance per phase of machine A is j10 Q, while that of machine B is j12 Q (winding resistance and losses are negligible). The excitation of machine A is adjusted so that it delivers 150 A at a lagging power factor, and the governors that control the input torque of the generator prime movers are set such that the load is shared equally between the two machines. a. Determine the following for each machine: i. the armature current; ii. the power factor; ii. the excitation voltage, Ef; and, iv. the power angle. Neatly sketch a phasor diagram for machine A, taking the terminal voltage as the reference. Ensure all phasors are labelled, and all angles indicated. b.
In a short compound generator, the terminal voltage is 230 induced emf tion of this power. field, diverter and arnmature resistances are 92 2, 0.015 2, 0.03 2 and 0. 03 2 respectively. V when generator delivers b) total power generted and 160 A. Determine a) c) distribu- Given that the shunt field, series
2.) A 60-MVA, 69.3 kV, 3-phase synchronous generator has a synchronous reactance of 15 ohms per phase and negligible resistance. The generator is delivering rated power at 0.8 pf leading at rated terminal voltage to an infinite bus bar. Determine the magnitude of the power angle. Subject Electrical machine 2
Two three-phase, 6.6 kV, Y-connected synchronous generators are operating in parallel to supply a load of 3000 kW at 0.8 power factor lagging. The synchronous reactance per phase of machine A is j10 2, while that of machine B is j12 Q (winding resistance and losses are negligible). The excitation of machine A is adjusted so that it delivers 150 A at a lagging power factor, and the governors that control the input torque of the generator prime movers are set such that the load is shared equally between the two machines. Determine the following for each machine: the armature current; а. i. the power factor; the excitation voltage, Ef; and, the power angle. ii. iii. iv. Neatly sketch a phasor diagram for machine A, taking the terminal voltage as the reference. Ensure all phasors are labelled, and all angles indicated. b.
Suppose two generators supplying a load. Generator-1 has a no-load frequency of 61.5 Hz and a slopesp1 of 1 MW/Hz. Generator-2 has a no-load frequency of 62 Hz and a slope sp2 of 1MW/Hz. The twogenerators are supplying a real load totaling 2.5 MW at 0.8 PF lagging. Draw the resulting systempower-frequency or house-diagrams. Determine (a) at what frequency is the system operating, andhow much power is supplied by each of the generators? (b) if an additional 0.75-MW load wereattached to this power system. What would the new system frequency be, and how much powerwould the each generator supply now? (c) with the system in the configuration described in part (b),what will the system frequency and generators power be if the governor set points on generator-1 areincreased by 0.5 Hz?
(b) A salient pole synchronous generator with negligible resistance, has the following per unit parameters: Xa = 0.8, X, = 0.5 If this generator is supplying rated KVA at rated voltage and at 0.8 power factor lagging, compute the load angle and the excitation emf. 03