pt) You have two solar hot water collectors on the roof, each is 4 feet by 8 feet. Assume the panels are 50% efficient. The panels receive about 300 BTU per hour per square foot, for a total of 5 hours. You have a hot water tank connected to the panels filled with 600 pounds of water, starting in the morning at 60 deg F. What will the water temperature be at the end of the 5 hours?

pt) You have two solar hot water collectors on the roof, each is 4 feet by 8 feet. Assume the panels are 50% efficient. The panels receive about 300 BTU per hour per square foot, for a total of 5 hours. You have a hot water tank connected to the panels filled with 600 pounds of water, starting in the morning at 60 deg F. What will the water temperature be at the end of the 5 hours?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

c) A cooking pan is made of aluminium of mass 2kg and a specific heat capacity of 0.95KJ/kgK. The pan is filled with 6kg of water of density 1000kg/m and heat capacity of 4.2kJ/kgK. If the pan and water are at room temperature of 20°C, how much energy is required to raise the temperature to the boiling point of water.
Pls.answer thank you! A classroom that normally contains 40 people is to be air-conditioned with window air-conditioning units of 5 KW cooling capacity. A person at rest may be assumed to dissipate heat at a rate of about 360 KJ/hr. There are 10 light bulbs in the room, each with a rating of 100 watts. The rate of heat transfer to the classroom through the walls and the windows is estimated to be 15,000 KJ/hr. If the room air is to be maintained at a constant temperature of 21°C, determine the number of window air-conditioning units required.
2.0 Liquid ammonia at a temperature of 26 °C is available at the expansion valve . The temperature of the vaporizing ammonia in the evaporator is 2 °C. a) Find the percentage of liquid vaporized while flowing through the expansion valve .b) The internal energy entering the evaporator. c) the cop of the heat pump.
In a pinbar cylinder arrangement, there is 2 kg of liquid water at 20 ° C and 100 kPa pressure. 1000 lPa is required to connect the piston in the cylinder to the movement. Then the water inside the piston was heated to a temperature of 300 ° C by the welding medium with 500 ° C and the piston moved a certain amount accordingly. According to this, a) Find the final volume (mº). b) Find the boundary work done (kJ). c) Find the amount of heat transfer (kJ). d) Find the total entropy generation (kJ / K).
Liquid ammonia at a temperature of 26 C is available at the expansion valve . The temperature of the vaporizing ammonia in the evaporator is 2 C. a) Find the percentage of liquid vaporized while flowing through the expansion valve .b) The internal energy entering the evaporator. c) the cop of the heat pump show the t-s diagram
Name three other examples of heat energy transfer in the home
Boil the kettle at your home. Determine the following c) Change of internal energy of water?
1. A driver fills an 18.9L steel gasoline can with gasoline at 15 deg C right up to the top. He forgets to replace the cap and leaves the can in the back of his truck. The temperature climbs to 42 deg C by 1P.M. how much gasoline spills out of the can?
If the average energy in a nuclear reaction is 500 MeV/fission, what is the power output of a reactor in MW if there are 2.34x10" fissions per minute?
1d) A house has an electric resistance heater with an efficiency of 95%. The house is in a cold climate with heating requirement of 120 million BTU/year and no need for air conditioning in the summer. If a 14 costs $10700, what heat pump with an HSPF is the payback time in years (2 significant digits) for the heating savings compared to keeping the current resistance heater assuming electricity costs of $0.12/kWh?
ACTIVITY 3. PLSS help me answer this atleast half of it
Question 2. A household with electric resistance heating plans to switch from resistive heating to a ground source heat pump. Annual heat consumption of the house is 30 000 kWh. Investment cost of the heat pump is 21 000 €. Heat pumps COP is 4.0. How much are the annual savings compared to resistive heating after the change of the heating system (in kWh)? Average price of electricity is assumed to be 12 c/kWh. Round off your answer to one decimal digit and enter it without the unit.