Please upload your full solution to the following problem. Calculate the bed life, volume of water treated, minimum carbon usage rate (CUR), and maximum specific throughput for trichloroethene (TCE) given the following design specifications: Influent concentration = 1 mg/L TCE . Carbon type: Calgon Filtrasorb 400 (12 x 40 mesh); Pb = 450 g/L • Freundlich parameters for TCE • Freundlich capacity parameter K = 55.9 (mg/g)(L/mg)¹/n • Freundlich intensity parameter 1/n = 0.48 Treatment objective = 0.005 mg/L TCE Flow rate=378.5 L/min (100 gal/min) Empty bed contact (EBCT) = 10 min . . . . Assume that no other solutes compete with TCE for adsorption onto the GAC, and that the GAC is saturated at the influent concentration.

Please upload your full solution to the following problem. Calculate the bed life, volume of water treated, minimum carbon usage rate (CUR), and maximum specific throughput for trichloroethene (TCE) given the following design specifications: Influent concentration = 1 mg/L TCE . Carbon type: Calgon Filtrasorb 400 (12 x 40 mesh); Pb = 450 g/L • Freundlich parameters for TCE • Freundlich capacity parameter K = 55.9 (mg/g)(L/mg)¹/n • Freundlich intensity parameter 1/n = 0.48 Treatment objective = 0.005 mg/L TCE Flow rate=378.5 L/min (100 gal/min) Empty bed contact (EBCT) = 10 min . . . . Assume that no other solutes compete with TCE for adsorption onto the GAC, and that the GAC is saturated at the influent concentration.

Solid Waste Engineering

3rd Edition

ISBN:9781305635203

Author:Worrell, William A.

Publisher:Worrell, William A.

Chapter5: Separation Processes

Section: Chapter Questions

Problem 5.18P

See similar textbooks

Similar questions

6. A commeIcial laundry is considering constructing an ion exchange process to remove hardness from the water. The flow required is 1000 m/day and they use city water which contains 200 mg/1 as CaCO3 of calcrum and 100 mg/1 as CaCO3 of magnesium. Total hardness should be reduced to 80 mg/1 as CaCO3. The resin has a Total Hardness (TH) capacity of 60 kg TH/m' of media and the recommended hydraulic loading rate is 0.5 m/min-m2. (a) What is the water flow rate (m/d) that need to be treated ? (b) What is the total daily resin volume (m') required to soften the water? And (c) What is the area of exchanger bed needed.
Design Problem, a horizontal separator for the following operating conditions. Gas rate: 15 MMSCFD Gas specific gravity: 0.6 Oil rate: 4,000 bbl/day Oil gravity: 40 API Operating pressure: 1000 psi Operating temperature: 60F Retention time: 3min Droplet size removal: 120 µm d Liquid Leff 20 24 30 36 42 46 No 2 Gas Leff LISS Hg=0.013 CP Pg=3.708 lb/ft³ Po= 53.03 lb/ft³ Z=0.84 SR 15 marks)
Complete solution, need fast
APPLICATION OF PIPE INSULATION IN PLUMBING INDUSTYR
Really really need. Please don't stamp it with an already made solution. Thanks.
highway engineering labartory name test Standard Test Method for Ductility of Bituminous Materials same quation reports 4. Importance of adding “NaCl2” salt .5. What is the reason of not coating the clips inside surface of ductility mold by a lubricant?6. Draw the mold of the specimen.
Please correct solution and fast
USE 2015 NSCP
7. A commercial laundry is considering constructing an ion exchange process to remove hardness from the water. The flow required is 1000 m/day and they use city water which contains 200 mg/l as CaCO3 of calcium and 100 mg/l as CACO3 of magnesium. Total hardness should be reduced to 80 mg/l as CaCO3. The resin has a Total Hardness (TH) capacity of 60 kg TH/m³ of media and the recommended hydraulic loading rate is 0.5 m/min-m2. (a) What is the water flow rate (m/d) that need to be treated ? (b) What is the total daily resin volume (m') required to soften the water? And (c) What is the area of exchanger bed needed.
Please include FBD in your solution
According to Figure 5-20, is ii possible to completely separate one of the four materials from the other three? Explain your answer.
4-33. Following are results of gradation tests on three aggregates: Aggregate A 100% 92% 41% 19% 7% 4% 2% 1% Passing 25 mm (1 in.) 19 mm (3/4 in.) 9.5 mm (3/8 in.) 4.75 mm (No. 4) 2.36 mm (No. 8) 600 μm (No. 30) 300 μm (No. 50) 75 μm (No. 200) Aggregate B 100% 77% 60% 42% 36% 28% Aggregate C 100% 96% 79% 40% 16% 3% Combine these to give a gradation falling approximately in the center of the specification given in Section 4-5.1.