The rigid beam BC is supported by rods (1) and (2). The cross-sectional area of rod (1) is 10 mm2. The cross-sectional area of rod (2) is 18 mm2. For a uniformly distributed load of w = 2.4 kN/m, determine the length a so that the normal stress is the same in each rod. Assume L = 5.25 m. Therigid beam BC is supported by rods (1) and (2). The cross-sectional area of rod (1) is 10 mm². The cross-sectional area of rod (2) is18 mm². For a uniformly distributed load of w = 2.4 kN/m, determine the length a so that the normal stress is the same in each rod.Assume L = 5.25 m.A(1)WBAnswer: a =L2m

Answered: Image /qna-images/answer/ca993a7c-d2ee-4b77-a95c-6b3dee9b9c9b.jpg

The rigid beam BC is supported by rods (1) and (2). The cross-sectional area of rod (1) is 10 mm². The cross-sectional area of rod (2) is 18 mm². For a uniformly distributed load of w = 2.4 kN/m, determine the length a so that the normal stress is the same in each rod. Assume L = 5.25 m. A (1) W B Answer: a = L 2 m

The rigid beam BC is supported by rods (1) and (2). The cross-sectional area of rod (1) is 10 mm². The cross-sectional area of rod (2) is 18 mm². For a uniformly distributed load of w = 2.4 kN/m, determine the length a so that the normal stress is the same in each rod. Assume L = 5.25 m. A (1) W B Answer: a = L 2 m

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter1: Tension, Compression, And Shear

Section: Chapter Questions

Problem 1.9.3P: A tie-down on the deck of a sailboat consists of a bent bar boiled at both ends, as shown in the...

See similar textbooks

Similar questions

The rigid beam BC is supported by rods (1) and (2). The cross-sectional area of rod (1) is 10 mm2. The cross-sectional area of rod (2) is 19 mm2. For a uniformly distributed load of w = 3.5 kN/m, determine the length a so that the normal stress is the same in each rod. Assume L = 4.55 m.
Eight steel cables (with equal distance to each other) are supporting a circular heavy moulding of diameter 3m from an overhead point. If the moulding weighs 5 kN/m and the attachment point is 4m above it, determine the following:a. Calculate the tension of the cable.b. Determine the diameter of the wire if the allowable stress is 125 MPa.c. If the diameter of the cable is 10 mm, find the deflection of the steel cable.d. If the diameter of the cable is 10 mm, find the vertical displacement of the molder.
Two solid cylindrical rods support a load of P = 27 kN as shown. Rod (1) has a diameter of 17 mm, and the diameter of rod (2) is 12 mm. Determine the axial stress in rod (1). 3.8 m 4.6 m (1) 5.6 m 3.3 m 125.7 MPa 96.7 MPa 59.1 MPa 104.1 MPa 79.9 MPa B (2)
The rigid beam BCis supported by rods (1) and (2). The cross-sectional area of rod (1) is 10 mm?. The cross- sectional area of rod (2) is 17 mm?. For a uniformly distributed load of w = 4.2 kN/m, determine the length a so that the normal stress is the same in each rod. Assume L= 4.85 m. (1) (2) B |C
Two solid cylindrical rods support a load of P = 32 kN as shown. Rod (1) has a diameter of 14 mm, and the diameter of rod (2) is 12 mm. Determine the axial stress in rod (1). 3.8 m 4.6 m (1) 5.6 m O 169.0 MPa 139.6 MPa 125.8 MPa O 104.5 MPa O 182.6 MPa B U 3.3 m
3 m Load D 2 m+ 3 m The member AC is made from an aluminium alloy and has a rectangular cross section of 100mm x 10mm. Calculate the stress in member AC if a load of 57.4 kN is applied at point D.
A composite axial structure consists of two rods joined at flange B. Rods (1) and (2) are attached to rigid supports at A and C, respectively. 195 kN (1) (2) A concentrated load P is applied to flange B in the direction 2300 mm 3000 mm shown. Determine the internal forces and normal stresses in each rod. (+ = tension, compression) - = Rod properties Also, determine the deflection of flange B in the x direction. A1 780 mm2 A2 = 1100 mm? (+= right, - = left) E1 40 GPa E, = 120 GPa F1 kN Try One F2 kN MPа 02 MPa UB mm
The rigid beam BC is supported by rods (1) and (2). The cross-sectional area of rod (1) is 9 mm². The cross-sectional area of rod (2) is 14 mm². For a uniformly distributed load of w 4.0 kN/m, determine the length a so that the normal stress is the same in each rod. Assume L = 4.50 m. (1) Answer: a = L W a (2) m
1. A 60-mm diameter steel tube with a wall thickness of 3 mm just fits in a rigid hole. Determine the tangential stress developed if an axial compressive load of 12 kN is applied. Use v = 0.30 and E = 200 GPa. Answer: 0 = 6.37 MPa 2. A 200-mm long bronze tube closed at both ends fits without clearance in a 70-mm hole in a rigid block. It has a diameter of 70 mm and a wall thickness of 5 mm. The tube then sustained an internal pressure of 4.5 MPa. Use v = 0.33 and E= 83 GPa. Compute the tangential stress in the tube. Answer: Ot = 5.20 MPa
Two axial members are used to 4.3 m support a load P applied at joint B. Member (1) has a cross-sectional area of A: = 3,080 mm? and an allowable normal stress of 180 MPa. Member (2) has a cross-sectional area of A2 = 4,650 mm? and an (1) 5.0 m allowable normal stress of 75 MPa. Determine the maximum load P that may be supported by the structure without exceeding either allowable normal stress. (2) 2.0 m
The rigid beam BC is supported by rods (1) and (2). The cross-sectional area of rod (1) is 8 mm². The cross-sectional area of rod (2) is 17 mm². For a uniformly distributed load of w = 2.8 kN/m, determine the length a so that the normal stress is the same in each rod. Assume L = 4.20 m. (1) B Answer: a = i L W E 2
1. A bronze bar is fastened between a steel bar and an aluminum bar as shown. Axial loads are applied at the positions indicated. Find the largest value of P that will not exceed an overall deformation of 3.0 mm, or the following stresses: 140 MPa in the steel, 120 MPa in the bronze, and 80 MPa in the aluminum. Assume that the assembly is suitably braced to prevent buckling. Use EsT=200GPA, EAL = 70 GPa, and EBr = 83 GPa. As = 480 mm? Ab=650 mm? Al= 320 mm? 2P 4P 3P 1m 2m 1.5m