In one trial determination of the concentration of NaOCl in the diluted bleach sample, 10.00 mL of the diluted bleach solution required 23.32 mL of 0.0195 M Na2S2O3 titrant to reach the endpoint. What is the molar concentration of NaOCl in the diluted bleach solution?

In one trial determination of the concentration of NaOCl in the diluted bleach sample, 10.00 mL of the diluted bleach solution required 23.32 mL of 0.0195 M Na2S2O3 titrant to reach the endpoint. What is the molar concentration of NaOCl in the diluted bleach solution?

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter17: Complexation And Precipitation Reactions And Titrations

Section: Chapter Questions

Problem 17.24QAP

See similar textbooks

Related questions

Q: In one trial of the standardization of a Na2S2O3 solution, a 10.00 mL volume of 5.00×10-3 M KIO3 is…

A: Given data is as follows: The volume of KIO3 = 10.00 mL The concentration of KIO3 = 5.00×10-3 M The…

Q: 25 mL of a bleach (NaOCl) sample is diluted to 500 mL. An excessive amount of KI is added to the 20…

A: The question is based on the concept of quantitative analysis . we have to calculate percentage of…

Q: You are going to standardize your sodium hydroxide by titrating with potassium hydrogen phthalate.…

Q: Choi is fond of carbonated beverages so he crafted his own soda formulation called "Sodalicious."…

A: Since you have asked a question with multiple subparts, we will answer only first 3 subparts for…

Q: Mark and John, two vinegar enthusiasts, are each tasked to determine the acetic acid content of…

A: Given: Mass of KHP = 0.540 g Molecular weight of KHP = 204.22 g/mol Purity of KHP = 99.4% Volume of…

Q: In one trial of the standardization of a Na2S2O3 solution, a 10.00 mL volume of 5.00×10-3 M KIO3 is…

A: Solution is given below in next step

Q: Titration of 0.2342 g of pure Na,C,O, (134.0 g/mol) required 13.45 ml of KMNO, solution according to…

A: Number of moles = mass/molar mass Molarity = number of moles/volume of solution (in L)

Q: The solubility product of a sparingly soluble salt, XF2, was determined by titration and found to be…

A: Given that: solubility product of XF2 = 2.9×10-10 M volume of XF2 = 25.00 mL molarity of HCl =…

Q: 1. A solution was prepared by dissolving 1210 mg of K3Fe(CN)6 (MM=329.2 g/mol) in sufficient water…

Q: What is the theoretical concentration of a standard solution prepared by 2.50 g of NaOH (MW=40.00…

Q: b. What mass of MgSO4•7H2O will need to be weighed to prepare this solution'? c. A student preparing…

A: Since the concentration of the solution is for subpart b is not given, we'll do the subpart c.…

Q: A student is asked to perform a neutralization reaction between hydrochloric acid, HCl and sodium…

A: Since you have posted a question with multiple sub-parts, we will solve first three sub-parts for…

Q: KHP (aq)+NaOH (aq)-->NaKHP (aq)+H2O(l) Trial Vi (mL) Vf (mL) 1 36.19 48.56 2 3 A…

A: According to the chemical equation, the number of moles of KHP react with NaOH are equal.

Q: Rei and Akari, two vinegar enthusiasts, are each tasked to determine the acetic acid content of…

A: Given: mass of KHP = 0.540 g Volume of KHP stock solution = 10.0 mL Volume of diluted KHP solution =…

Q: By pipet, 10.00 mL of a 0.823 M stock solution of potassium permanganate (KMnO4) was transferred to…

Q: What is the exact concentration of the NaOH titrant in molarity? Express your answer in 3…

A: Since you have asked a question with multiple subparts, we will answer only 3 subparts for you. In…

Q: A titrant of 1.0 M K2Cr2O7 was used for titration of 30 mL aqueous ethanol C2H6O solution and…

Q: In the standardization of HCl solution, a pale pink end-point using phenolphthalein indicator was…

Q: Mark and John, two vinegar enthusiasts, are each tasked to determine the acetic acid content of…

A: Given: mass of KHP = 0.540 g Volume of KHP stock solution = 10.0 mL Volume of diluted KHP solution =…

Q: Maganite is the leading brand for antacid to alleviate heartburn. Its active ingredient is a…

A: A 50.0 mL saturated solution was prepared. After filtering each solution, a 5.0 mL aliquot was…

Q: We want to determine the purity of alum sample bought in a local pharmacy in Miagao. A Chem 28…

A: Mass of sample = 1.5879 gm Mass of Al2O3 = 0.1572 gm Molar mass of potash alum = 474.4 gm/mole…

Q: To determine the percentage of bromide in a mixture containing a soluble bromide salt, the procedure…

A: Given : Mass of filter paper = 1.3587 g Mass of sample taken = 0.7893 g And mass of filter paper…

Q: one trial of the standardization of a Na2S2O3 solution, a 10.00 mL volume of 5.00×10-3 M KIO3 is…

A: Given Taken 10.00 mL volume of 5.00×10-³ M KIO3 15.96 mL of sodium thiosulfate solution We have…

Q: In a biochemical assay, a chemist needs to add 3.81 g of glucose to a reaction mixture. Calculate…

A: Molar mass of Glucose is 180.2 g/mol. Calculation of no. of mol of Glucose:

Q: A solution was prepared by dissolving 435 mg of K3Fe(CN)6 in enough water to give 945 mL of…

A: As the question contains multiple sub-parts so only the first three are solved in this solution. If…

Q: All arsenic in the mineral containing 20 g of arsenic is dissolved by converting it into As3+.…

A: Working formula Decinormal = one tenth of normality = 0.1 N Normality = Molarity*no of equivalents…

Q: The aluminum in a 1.200g sample of impure ammonium aluminum sulfate was precipitated with aqueous…

A: Mass of Sample is 1.200 g. Mass of anhydrous Al2O3 is 0.2001 g. Calculation of no. of mol of…

Q: the calcium in a 5.00ml serum sample is precipitated as CaC2O4 with ammonium oxalate. the filtered…

A: Number of moles of KMnO4 , n = Molarity x volume in L =…

Q: A permanganate solution is prepared by dissolving 20.0123 g KMNO4 in 500 mL of distilled water and…

Q: Rei and Akari, two vinegar enthusiasts, are each tasked to determine the acetic acid content of…

A: Given: mass of KHP = 0.540 g Volume of KHP stock solution = 10.0 mL Volume of diluted KHP solution =…

Q: In one trial of the standardization of a Na2S2O3 solution, a 10.00 mL volume of 5.00×10-3 M KIO3 is…

Q: If 100. mL of 0.400 M Na2SO4 is added to 200. mL of 0.600 M NaI, what is the concentration of Na+…

A: Answer:- This question is answered by using the simple concept of calculation of concentration of…

Q: What is the percentage purity of sodium hydroxide pellets, 1.0056 g of which was titrated with 21.5…

A: Solution The mole construct may be a convenient methodology of expressing the quantity of a…

Q: A solution is prepared by pipetting 25.0 mL of 0.350 M CuCl2 into a 100.0 mL volumetric flask,…

A: Concentration in terms of molarity is defined as the moles of solute present per litre of the…

Q: Solution A was prepared by weighing 6.08 grams of K3Fe(CN)6 (MW 329.2 g/mol) and dissolving the…

Q: The tartaric acid, H2C4H4O6 (150.087 g/mol ) in 100.0 mL wine sample was determined using sodium…

A: The question is based on the concept of titrations. we are titrating a weak acid with a strong…

Q: Choi is fond of carbonated beverages so he crafted his own soda formulation called “Sodalicious.”…

A: We have two different variants of soda formulations which are: 1. Sodalicious by Choi. 2. Soda Pop…

Q: What is the acetic acid concentration of Mark’s and John’s vinegar in molarity given that the…

A: Standardisation of KOH 0.540 g of KHP require 2.80 mL of KOH Molar mass of…

Q: 7.63 mL of a 0.15 M stock solution into a 25.00 mL volumetric flask and dilute to the mark with…

A: Given information: 7.63 mL of a 0.15 M stock solution Volume of new solution is 25.00 mL

Q: The SO2 present in air is mainly responsible for acid rain. Its concentration can bé determined by…

A: Molarity of the solution is equal to the number of moles of solute present in one liter of the…

Q: In a lab, you diluted a sample of bleach to 1/10 concentration in a 250 volumetric flask. Then…

A: Molarity of sodium thiosulfate, Na2S2O3 used = 0.1215 M Bleach has NaClO or HClO that reacts with…

Q: The purity of a sample of sodium oxalate, Na2C2O4, is determined by titrating with a standard…

A: The balanced chemical equation has the number of atoms of the reactants is equal to the atoms count…

Q: A stock solution containing Mn2+ ions was prepared by dissolving 1.584 g pure manganese metal in…

A: Given that, Mass of Mn= 1.584 g Volume of stock solution = 1.00 L Now, 10.00 mL of this stock…

Q: A solution of 0.332 M KOH is used to titrate 16.0 mL of a 0.192 M H3PO4 solution. What…

A: No. of moles = Molarity × volume We need to balance ( no. of moles ÷ stoichiometric coefficient) .…

Q: Many chemical compounds contain impurities. Crude potassium carbonate (K2CO3) obtained from the…

Q: NEUTRALIZATION From the previous lesson, you have learned that the Arrhenius theory defines…

Q: A permanganate solution is prepared by dissolving 20.0123 g KMNO4 in 500 mL of distilled water and…

A: Given: The reaction is as follows, 5H2C2O4+2MnO4-+6H+⇌10CO2+2Mn2++8H2O Molarity of oxalic acid =…

Q: Maganite is the leading brand for antacid to alleviate heartburn. Its active ingredient is a…

A: The amount of a substance that resides in a solution determines the concentration of the solution.…

Q: The conversion of nitrogen to ammonia, an essential process in the nitrogen cycle, occurs only in…

A: Given, the reaction involved in the titration: The volume of the Mo3+ sample = 30 mL The volume of…

Q: In one trial of the standardization of a Na2S2O3 solution, a 10.00 mL volume of 5.00×10-3 M KIO3 is…

A: We have to calculate the Molarity of sodium thiosulfate .

Question

In one trial determination of the concentration of NaOCl in the diluted bleach sample, 10.00 mL of the diluted bleach solution required 23.32 mL of 0.0195 M Na₂S₂O₃ titrant to reach the endpoint. What is the molar concentration of NaOCl in the diluted bleach solution?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Sample Preparation in Analytical Chemistry

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, chemistry and related others by exploring similar questions and additional content below.

Similar questions

Distinguish between the terms slightly soluble and weak. electrolyte.
An artificial fruit beverage contains 12.0 g of tartaric acid, H2C4H4O6, to achieve tartness. It is titrated with a basic solution that has a density of 1.045 g/cm3 and contains 5.00 mass percent KOH. What volume of the basic solution is required? (One mole of tartaric acid reacts with two moles of hydroxide ion.)
The Handbook of Chemistry and Physics (http://openstaxcollege.org/l/16Handbook) gives solubilities of the following compounds in grams per 100 mL of water. Because these compounds are only slightly soluble, assume that the volume does not change on dissolution and calculate the solubility product for each. (a) BaSiF6, 0.026 g/100 mL (contains SiF62- ions) (b) Ce(IO3)4, 1.5102 g/100 mL (c) Gd2(SO4)3, 3.98 g/100 mL (d) (NH4)2PtBr6, 0.59 g/100 mL (contains PtBr62- ions)
According to the Resource Conservation and Recovery Act (RCRA), waste material is classified as toxic and must be handled as hazardous if the lead concentration exceeds 5 mg/L. By adding chloride ion, the lead ion will precipitate as PbCl2, which can be separated from the liquid portion. Once the lead has been removed, the rest of the waste can be sent to a conventional waste treatment facility. How many grams of sodium chloride must be added to 500 L of a waste solution to reduce the concentration of the Pb2+ ion from 10 to 5 mg/L?
A 0.411 g sample of potassium hydrogen phthalate, KHC8H4O4 (molar mass = 204.22g/mol), is dissolved with 50.0 mL of deionized water in a 125mL Erlenmeyer flask. The sample is titrated to the phenolphthalein endpoint with 15.17 mL of a sodium hydroxide solution. What is the molar concentration of the NaOH solution? Express the molar concentration of NaOH to the correct number of significant figures.
1. A sample of pure sodium oxalate, Na2C2O4 , weighing 0.2856 g is dissolved in water, sulfuric acid is added, and the solution titrated at 70°C , requiring 45.12 mL of a KMNO4 solution. The end point is overrun and back-titration is carried out with 1.74 mL of a 0.1032 N solution of oxalic acid. Calculate the normality of the KMNO4 solution. Hint: A redox reaction is involed between oxalate and permanganate. Look at the changes in oxidation state by determining the balanced redox reaction: 5C20,2 + + 2MN2+ 2 Mn04 + 10H* → 10CO2 + 8H20
A hydrochloric acid solution is standardized by titrating 0.5008 g of primary standard tris(hydroxymethyl) aminomethane, C4H11NO3, with 99.9780% purity. If 39.68 mL isrequired for the titration, what is the molarity of the acid?
A student measured 20 drops of vinegar and one drop of phenolphthalein solution into a well of her well plate. After she had added 35 drops of NaOH solution to the same well, the well was full, but she had still not reached the titration endpoint. She then took a clean pipet and transferred some of the titration mixture into a second well. She rinsed the pipet with a few drops of distilled water and transferred the rinse water into the titration mixture in the second well. Then she continued adding NaOH solution to both wells until she reached the endpoint in both wells. She then recorded the total number of drops of NaOH solution added to both wells and used it to calculate the data for her vinegar titration. Briefly comment on her procedure and the accuracy of her results.
A 2.187 g sample of a solid mixture containing only potassium carbonate (MM = 138.2058 g/mol) and potassium bicarbonate ( MM 100.1154 g/mol) is dissolved in distilled water. A volume of 33.47 mL of a 0.749 M HCI standard solution is required to titrate the mixture to a bromocresol green end point. Calculate the weight percent of potassium carbonate and potassium bicarbonate in the mixture. K₂CO₂: KHCO,: wt% wt%
A 2.00 mL sample of serum is analyzed for protein by the modified Kjeldahl method. The sample is digested and the resulting ammonia is distilled into a boric acid solution, consuming 15.0 mL of standard HCl to titrate the ammonium borate. HCl is standardized by treating 0.330 g of pure (NH₄)₂SO₄ in the same way. If 33.3 mL of acid is consumed in the standardization titration, what is the serum protein concentration in g% (wt/vol)?
A mixture containing KCl and NaBr was analyzed by Mohr's method. A mass of 0.31011 g of the mixture was dissolved in 50 mL of water, the Na2CrO4 indicator was added, and it was titrated with a 0.11011 mol/L AgNO3 solution. The endpoint was 36.011 mL. What are the % m/m concentrations of KCl and NaBr in the mixture?
A mass of 3.3214 g of sodium bicarbonate was dissolved and diluted to 250.00 ml of aqueous solution. A 29.550X mL of sodium bicarbonate solution was used to neutralise 25.00 ml of H2SO, solution during a titration. Calculate the molar concentration of H2SO4 solution.