Estimate the corona loss for a three-phase, 110 kV, 50 Hz, 150 km long transmission line consisting of three conductors each of 10 mm diameter and spaced 2.5 m apart in an equilateral triangle formation. The temperature of air is 40ºC and the atmospheric pressure is 750 mm of mercury. Take irregularity factor as 0.89. Ionization of air may be assumed to take place at a maximum voltage gradient of 30 kV/cm

Estimate the corona loss for a three-phase, 110 kV, 50 Hz, 150 km long transmission line consisting of three conductors each of 10 mm diameter and spaced 2.5 m apart in an equilateral triangle formation. The temperature of air is 40ºC and the atmospheric pressure is 750 mm of mercury. Take irregularity factor as 0.89. Ionization of air may be assumed to take place at a maximum voltage gradient of 30 kV/cm

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter4: Transmission Line Parameters

Section: Chapter Questions

Problem 4.37MCQ

See similar textbooks

Similar questions

A single-phase transmission line consisting of two conductors, the radius of each conductor is 0.4 cm, the distance between the conductors is three and half meters and the height above ground is eight meter. Determine 1)The capacitance in uF/km without effect of ground 2)The capacitance in uF/km with effect of ground
2.5 A 3-phase single circuit bundled conductor line with two sub-conductors per phase has horizontal spacing with 6.1 m between the centre lines of adjacent phases. The distance between the sub- conductors of each phase is 30.5 cm and each sub-conductor has a diameter of 2.54 cm. Find the inductance per phase per km. [0.988 mH]
Q3: A single circuit three-phase transmission line is composed of four ACSR conductors per phase with the horizontal configuration as shown in the figure below. Find the inductance per km length of the transmission line. The radius of each conductor in the bundle is 1.25 cm. O0.5 m Q0.5 O0.5 m 4 m
ASAP PLS Calculate the capacitance of a conductor to neutral in a single-phase transmission line having two parallel conductors spaced 3 m apart. The diameter of each conductor is 1.2 cm.
For the Figure 6 shown: A 441 -km long, 59 Hz, three-phase, 3-wire, transmission line is composed of stranded conductors in each line with GMR of 12.33 -mm. If the distance D in the figure is 3.24 m., What is inductance per line in (mH)? Figure 6 o 1.732D 1.732D Ⓒ
For the Figure 8 shown: A 494 -km long, 48 Hz, three-phase, transmission line is composed 2 parallel lines. The conductors in the lines are stranded with GMR of 12.06 -mm each. If the distance D in the figure is 2.83 m., What is inductance per line in (mH)? Figure 8 'o ✪ 1.732D 1.732D b' D 1.732D 2D D 1.732D 。 a
GMR of a bundled conductor for inductance calculations was found as 7.3 cm. A, B and C phases of a transposed transmission line have a horizontally flat arrangement with D = 10 m between the centre points of the three phases. Find capacitance per phase per km of length. Express your answer in nF/km
The conductor of a single phase, 60 Hz two wire line is a solid round aluminium wire having a diameter of 0.412 cm. The conductor spacing is 3 m. Assume negligible skin effect. Determine (1) The total inductance of line in mH/mile
The conductors of a 10 km long, single phase, two wire line are seperated by a distance of 1.5 m. The diameter of each conductor is 1 cm. If the conductors are of copper, the inductance of the circuit is ??
For the Figure 9 shown: A 65 -km long, 59 Hz, three-phase, transmission line is composed 2 parallel lines. The conductors in the lines are stranded with GMR of 15.92 -mm each. If the distance D in the figure is 2.46 m., What is inductive reactance per line in (ohm)? Figure 9 $0 D 1.732D 2D 1.732D 1.732D D b' 1.732D
Problem 2.12: A three phase transmission line having conductor radius 1.25 cm and spaced 3 m apart in a horizontal plane. Determine the inductance of each conductor (line to neutral). Ans. L = (1.22-0.12) mH/km: L = 1.14 mH/km Le (1.220.12) mH/km
Calculate the capacitance per km per phase for a 3 phase, 50Hz, double circuit line shown in figure below. Each conductor has a diameter of 25mm and subconductor spacing 0,3m. the line is completely transposed. 0.3m 6 m 6m