Due to children's inmmature organ system, smaller size and larger body surface are children's fluid requirements differ greatly from adults. To calculate an infant of child's maintanance fluid requirements we use the formula below: Always convert weight from pounds to kilograms for pediatric fluids as well as medications! 100 ml/ kg for the first 10 kg of body weight 50 ml/kg for the next 10 kg of body weight 20 ml/kg for every kg over 20 kg We use this formula to calculate the hourly rate of IV fluid the child should receive in order to prevent fluid volume imbalances. 1) Calculate the daily fluid volume for a 6 kg child : 2) Calculate the daily fluid volume for a 14kg child: 3) Calculate the daily fluid volume for a 16kg child:

Due to children's inmmature organ system, smaller size and larger body surface are children's fluid requirements differ greatly from adults. To calculate an infant of child's maintanance fluid requirements we use the formula below: Always convert weight from pounds to kilograms for pediatric fluids as well as medications! 100 ml/ kg for the first 10 kg of body weight 50 ml/kg for the next 10 kg of body weight 20 ml/kg for every kg over 20 kg We use this formula to calculate the hourly rate of IV fluid the child should receive in order to prevent fluid volume imbalances. 1) Calculate the daily fluid volume for a 6 kg child : 2) Calculate the daily fluid volume for a 14kg child: 3) Calculate the daily fluid volume for a 16kg child:

C++ for Engineers and Scientists

4th Edition

ISBN:9781133187844

Author:Bronson, Gary J.

Publisher:Bronson, Gary J.

Chapter3: Assignment, Formatting, And Interactive Input

Section: Chapter Questions

Problem 6PP: (Heat transfer) The formula developed in Exercise 5 can be used to determine the cooling time, t,...

See similar textbooks

Similar questions

(Automotive) a. An automobile engine’s performance can be determined by monitoring its rotations per minute (rpm). Determine the conversion factors that can be used to convert rpm to frequency in hertz (Hz), given that 1rotation=1cycle,1minute=60seconds,and1Hz=1cycle/sec. b. Using the conversion factors you determined in Exercise 7a, convert 2000 rpm into hertz.
(Oceanography) The pressure, P, exerted on an underwater object can be determined by this formula: P=gh is the density of water, which is 1.94slug/ft3 . g is the acceleration caused by Earth’s gravity, which is 32.2ft/sec2. h is the object’s depth in the water in feet. a. Determine the units of P by calculating the units resulting from the right side of the formula. Check that your answer corresponds to the units for pressure listed in Table 1.1. b. Determine the pressure on a submarine operating at a depth of 2500 feet.
(Mechanics) The deflection at any point along the centerline of a cantilevered beam, such as the one used for a balcony (see Figure 5.15), when a load is distributed evenly along the beam is given by this formula: d=wx224EI(x2+6l24lx) d is the deflection at location x (ft). xisthedistancefromthesecuredend( ft).wistheweightplacedattheendofthebeam( lbs/ft).listhebeamlength( ft). Eisthemodulesofelasticity( lbs/f t 2 ).Iisthesecondmomentofinertia( f t 4 ). For the beam shown in Figure 5.15, the second moment of inertia is determined as follows: l=bh312 b is the beam’s base. h is the beam’s height. Using these formulas, write, compile, and run a C++ program that determines and displays a table of the deflection for a cantilevered pine beam at half-foot increments along its length, using the following data: w=200lbs/ftl=3ftE=187.2106lb/ft2b=.2fth=.3ft
(Heat transfer) The formula developed in Exercise 5 can be used to determine the cooling time, t, caused only by radiation, of each planet in the solar system. For convenience, this formula is repeated here (see Exercise 5 for a definition of each symbol): t=Nk2eAT3fin A=surfaceareaofasphere=4r2 N=numberofatoms=volumeofthespherevolumeofanatom Volume of a sphere sphere=43radius3 The volume of a single atom is approximately 11029m3 . Using this information and the current temperatures and radii listed in the following chart, determine the time it took each planet to cool to its current temperature, caused only by radiation.
Water flow at a water treatment plant is often in the units of gallons per day. However, in pipe flows, we often need to express water flow in feet per second. Convert 17,200 gallons per day to feet per second. Round your answer to the nearest ten-thousandth feet/second (i.e., 0.0000).
Q1/The pressure drop in pascals (Pa) for a fluid flowing in a pipe with a sudden decrease in diameter can be determined based on the loss of head equation given below: h = 24-11 2g Area A Area A Area A Where: V₂ is the velocity in position 2 (m/s), g: is acceleration due to gravity = 9.81 m/s², A₁ and A₂ are the cross-sectional areas of the tube in position 1 and 2 respectively. A==d² Where: d is the diameter (m). Write a program in a script file that calculates the head loss. When the script file is executed, it requests the user to input the velocity (V₂) in m/s and values of diameters (d, and d₂). The program displays the inputted value of v followed by a table with the values of diameters in the first and second columns and the corresponding values of h, in the third column. 2 2
Simplify the following expressions according to the commutative law: a. A⋅B + B⋅A + C⋅D⋅E + C⋅D⋅E + E⋅C⋅D b. A⋅B+A⋅C+B⋅A c. (L⋅M⋅N) (A⋅B) (C⋅D⋅E) (M⋅N⋅L) d. F⋅(K + R) + S⋅V + W⋅X + V⋅S + X⋅W + (R + K)⋅F
A simple pendulum is formed of a rope of length L = 2.2 m and a bob of mass m. %3D When the pendulum makes an angle e 10° with the vertical, the speed of the %3D bob is 2 m/s. The angular speed, e', at the lowest position is equal to: (g = 10 m/s^2)
The liquid-liquid extraction process carried out at the Electrochemical Materials Laboratory involves the extraction of nickel (Ni) from the liquid phase into an organic phase. Data from laboratory experiments are given in the table below. Ni phase cair, a (gr/l) 2 2,5 3 Ni phase organik, g (gr/l) 8,57 10 12 Assume that a is the amount of Ni in the liquid phase, and g is the amount of Ni in the organic phase. Quadratic interpolation is used to estimate the value of g, which is given by the following formula: g = x1a? + x2a + x3 a. Find three simultaneous equations based on the data given by the experimental results. b. Use the Gauss Elimination method to get the values of x1, x2 and x3 and then estimate the amount of Ni in the organic phase, if 2.3 g/l of Ni is available in the liquid phase. c. Use the LU Decomposition method to get the values of x1, x2 and x3. and then estimate the amount of Ni in the organic phase, if 2.3 g/l of Ni is available in the liquid phase.
Let t = 1 and use R or another computer program to plot the solution at z = 1 as a function of time for diffusion coefficients D = 10-3 and D = 10-0, Comment on the concentrations you obtain.
3. The velocity of a particle which starts from rest is given by the following table. t see) 0 2 8 10 12 14 16 v (fusee) o 12| 16 26 40| 44 25 12 18 Evaluate using trapezium rule, the total distance travelled in 18 seconds.
A voltmeter with an internal resistance of 100 KQ is used to measure the voltage Vab in the circuit shown below, what is the voltmeter reading? 36v R1-12 KQ M 30 18 mA R2=60 kQ R3=15 ΚΩ M + Vab Note: All students are welcomed to solve it, however assignments are mandatory for old students only.