Calvin Cliffs Nuclear Power Plant, located on the Hobbes River, generates 1.00 GW of power. In this plant, liquid sodium circulates between the reactor core and a heat exchanger located in the superheated steam that drives the turbine. Heat is absorbed by the liquid sodium in the core, and released by the liquid sodium (and into the superheated steam) in the heat exchanger. The temperature of the superheated steam is 591 K. Heat is released into the river, and the water in the river flows by at a temperature of 21°C. 1) (a) What is the highest efficiency that this plant can have? Submit You currently have 0 submissions for this question. Only 10 submission are allowed. You can make 10 more submissions for this question. 2) (b) How much heat is released into the river every second? GW Submit You currently have 0 submissions for this question. Only 10 submission are allowed. You can make 10 more submissions for this question. 3) (c) How much heat must be released by the core to supply 1.00 GW of electrical power? + +

Calvin Cliffs Nuclear Power Plant, located on the Hobbes River, generates 1.00 GW of power. In this plant, liquid sodium circulates between the reactor core and a heat exchanger located in the superheated steam that drives the turbine. Heat is absorbed by the liquid sodium in the core, and released by the liquid sodium (and into the superheated steam) in the heat exchanger. The temperature of the superheated steam is 591 K. Heat is released into the river, and the water in the river flows by at a temperature of 21°C. 1) (a) What is the highest efficiency that this plant can have? Submit You currently have 0 submissions for this question. Only 10 submission are allowed. You can make 10 more submissions for this question. 2) (b) How much heat is released into the river every second? GW Submit You currently have 0 submissions for this question. Only 10 submission are allowed. You can make 10 more submissions for this question. 3) (c) How much heat must be released by the core to supply 1.00 GW of electrical power? + +

University Physics Volume 2

18th Edition

ISBN:9781938168161

Author:OpenStax

Publisher:OpenStax

Chapter4: The Second Law Of Thermodynamics

Section: Chapter Questions

Problem 79AP: A coal power plant consumes 100,000 kg of coal per hour and produces 500 MW of power. If the heat of...

See similar textbooks

Similar questions

A 32% efficient electric power plant produces 900 MJ of electric energy per second and discharges waste heat into 20°C ocean water. Suppose the waste heat could be used to heat homes during the winter instead of being discharged into the ocean. A typical American house requires an average 20 kW for heating. How many homes could be heated with the waste heat of this one power plant?
A gasoline engine takes in 1.61 * 10^4 Jof heat and delivers 3700 J of work per cycle. The heat is obtained byburning gasoline with a heat of combustion of 4.60 * 10^4 J/g. If the engine goes through 60.0 cycles per second, what is its power output in kilowatts? In horsepower?
A power plant burns coal to produce pressurized steam at 540 K. The steam then condenses back into water at a temperature of 313 K. If the plant operates at 50.0% of its maximum efficiency and its power output is 1.23 × 108 W, at what rate must heat be removed by means of a cooling tower?
In a solar water heater, energy from the Sun is gathered by water that circulates through tubes in a rooftop collector.The solar radiation enters the collector through a transparent cover and warms the water in the tubes; this water is pumped into a holding tank. Assume that the efficiency of the overall system is 20% (that is, 80% of the incident solar energy is lost from the system). What collector area is necessary to raise the temperature of 200 L of water in the tank from 20C to 40°C in 1.0 h when the intensity of incident sunlight is 700 W/m2?
A solar panel receives energy from the sun at a , rate of 5kW .thermal energy is transfered from the solar panel to water with an efficiency of 20%.coldwater of mass 15kg enters the solar panel every hour .the specific heat capacity of water is 4200J/(kg°C).calculate the temperature of water
A turbine designed for an output of 100 MW receives superheated steam with the following conditions; hi = 3550 kJ/kg, v1 = 40 m/s, h2 = 1356 kJ/kg, v2= 125 m/s. Assume no heat loss, determine the desired mass flow rate of the steam (kg/s).
A gasoline engine takes in 1.61 * 10^4 Jof heat and delivers 3700 J of work per cycle. The heat is obtained byburning gasoline with a heat of combustion of 4.60 * 10^4 J/g. What mass of fuel is burned in each cycle?
A certain coal-fired power plant has a rated power capacity of P = 850 MW. The output of this plant is W = 0.26QH, where QH is the energy input as heat from the hot reservoir. a. If the power plant operates for a full day at its rated capacity, how much energy QH in MJ is needed? b. If, on average, one ton of coal contains Q = 25 GJ of energy, how many tons nH of coal would the plant need to operate for a day at its rated capacity? c. How many tons nC of this coal is exhausted as wasted heat to QC in a single day?
A compressor draws in 0.5 kgm/s of air with 7 m/s speed, 100 kPa pressure, and 0.95 m3/kgm. The air leaves at 5 m/s, 700 kPa and 0.19 m/kgm. The internal energy of the air leaving is 90 kJ/kgm greater than that of the air entering. The coolant absorbs heat from the air at the rate of 58 kW. Determine the work in kW.
A gasoline engine takes in 1.61 * 10^4 Jof heat and delivers 3700 J of work per cycle. The heat is obtained byburning gasoline with a heat of combustion of 4.60 * 10^4 J/g. How much heat is discarded in each cycle?
a vertical piston cylinder assembly containing water is being heated on a stove. during this process, 100 kJ of heat is transferred to the water. in the water's expansion process (because of the heat addition), 10 kJ of work is done. also there is 20 kJ heat loss from the assembly. what is the water's change of energy as a result of the heat addition process?
A power plant has a power output of 1285 MWand operates with an efficiency of 32.4 percent. Excess energy is carried away as heatfrom the plant to a nearby river that has aflow rate of 1.1 × 106kg/s.How much energy is transferred as heat tothe river each second?Answer in units of J/s.