+Vpa+Van-а+Vac-CAssume that the given three phase system is perfectly balanced, with a balanced source and balanced loads.Let the given line voltages be: Vba = 1200Z150° V and Vac = 1200Z30° V. Let the per-phase impedance of thewye-connected load be 900+j10 ohms.What is the magnitude of each line-to-neutral voltage across each load? Answer with 5 significant digits.

Answered: Image /qna-images/answer/32303228-e10c-4132-a270-388cbae5f2f4.jpg

b + Vpa +Van - + Vac C Assume that the given three phase system is perfectly balanced, with a balanced source and balanced loads. Let the given line voltages be: Vba = 1200Z150° V and Vac = 1200230° V. Let the per-phase impedance of the wye-connected load be 900+j10 ohms. What is the magnitude of each line-to-neutral voltage across each load? Answer with 5 significant digits.

b + Vpa +Van - + Vac C Assume that the given three phase system is perfectly balanced, with a balanced source and balanced loads. Let the given line voltages be: Vba = 1200Z150° V and Vac = 1200230° V. Let the per-phase impedance of the wye-connected load be 900+j10 ohms. What is the magnitude of each line-to-neutral voltage across each load? Answer with 5 significant digits.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.22MCQ: In a balanced three-phase Y-connected system with a positive-sequence source, the line-to-line...

See similar textbooks

Similar questions

In a balanced three-phase Y-connected system with a positive-sequence source, the line-to-line voltages are 3 times the line-to-neutral voltages and lend by 30. (a) True (b) False
A balanced three-phase load is connected to a 4.16-kV, three-phase, fourwire, grounded-wye dedicated distribution feeder. The load can be mode led by an impedance of ZL=(4.7+j9)/phase, wye-connected. The impedance of the phase conductors is (0.3+j1). Determine the following by using the phase A to neutral voltage as a reference and assume positive phase sequence: (a) Line currents for phases A, B, and C. (b) Line-to-neutral voltages for all three phases at the load. (c) Apparent. active, and reactive power dissipated per phase, and for all three phases in the load. (d) Active power losses per phase and for all three phases in the phase conductors.
A balanced -connected impedance load with (12+j9) per phase is supplied by a balanced three-phase 60-Hz,208-V source, (a) Calculate the line current, the total real and reactive power absorbed by the load, the load power factor, and the apparent load power, (b) Sketch a phasor diagram showing the line currents, the line-to-line source voltages, and the -load currents. Use Vab as the reference.
For a balanced- load supplied by a balanced positive-sequence source. the line currents into the load are 3 times the -Ioad currents and lag by 30. (a) True (b) False
An unbalanced three-phase wye-connected and grounded load is connected to a balanced three- phase four-wire source. The load impedances Z, Z,, and Z, are given as 70 230°, 85L-40°, and 50 235° 2/phase, respectively, and the phase a line voltage has an effective value of 13.8 kV: use the line-to-neutral voltage of phase a as the reference and determine the following: The total power aelivered to the loads. 1025.795 kW 1035.795 kW 1055.795 kW None
An unbalanced three-phase wye-connected and grounded load is connected to a balanced three- phase four-wire source. The load impedances Z, Z, and Z, are given as 70 230°, 85 L-40°, and 50 235° 2/phase, respectively, and the phase a line voltage has an effective value of 13.8 kV: use the line-to-neutral voltage of phase a as the reference and determine the following: The line and neutral currents. 113.823 L-450 93.737 L-000 150.353 L-2700 113.823 L-60° 93.737 L-000 159.353 L-2850 113.823 L-300 93.737 L-800 150.353 L-275o None
A three-phase impedance load consists of a balanced A-load in parallel with a balanced Y-load. The impedance of each leg of the A load is ZA = 6 + j6 Q, and the impedance of each leg of the Y load is Zy = 2 + j2 Ñ. The Y load is grounded through a neutral impedance Zn = jl2. Unbalanced line-to-ground source voltages Vag, Vbg, and Veg with sequence components Vo = 10 L 60°, Vị= 100L0°, and V2 = 15L 200° volts are applied to the load. a) Draw the zero-, positive-, and negative sequence networks. b) Determine the complex power delivered to each sequence network. c) Determine the total complex power delivered to the three-phase load.
1. Given the circuit below, the phase voltages are given by Van = 20040° Vrms. The source impedance is 5 + j7 per phase and the wire impedance is 8 +j10 per phase. Let the load impedance be Zy = 50 ohms. Find: Van Vin Ven a. II, and Ic b. c. VAN, VBN, and VCN, and VAB, VBC, and VCA Z₂ Z₂ Z₂ Zw Zw Zw B C le N
The one-line diagram of a three-phase power system is shown in the above figure. The line impedances are in per- unit on a 100-MVA base, and the line admittances are neglected. Use Gauss-Seidel method in Matlab to analyze the system the tolerance of error is 10-3. Then anwser the questions as follows. V, = 1.05200 0.01+ j0.025 300 + j200 MVA 0.015 + j0.035 150 MW 200 +j150 MVA 0.01+ j0.03 |V = 1.03 The admittance matrix (Y_bus)? 0.02 + jo.04 0.0125 + jo.03 2.
A balanced three-phase source with grounded neutral has line-to-neutral voltages of 120 volts with an-bn-cn sequence. This source has an internal series impedance of 0.1+j1.5 ohms per phase. It supplies power to an unbalanced three-phase wye, neutral grounded, load with impedances: Zan = 40+j30; Zbn = 36-j15; Zcn = 18+j24 ohms. If there is a single-line-to-ground fault at line a load-side, what is the magnitude of the fault current in amperes?
A balanced three-phase source with grounded neutral has line-to-neutral voltages of 120 volts with an-bn-cn sequence. This source has an internal series impedance of 0.1+j1.5 ohms per phase. It supplies power to an unbalanced three-phase wye, neutral grounded, load with impedances: Zan = 40+j30; Zbn = 36-j15; Zcn = 18+j24 ohms. If there is a three-phase fault at line load-side, what is the magnitude of the fault current in amperes?
Figure Q2(a) shows a positive sequence three phase circuits. Given a line-to-line voltage at generator, ERY = 415230°V. With assumption that all load impedance are balanced, Zn=Zyb=Zbr= 15 + jl8 2, determine all phase currents at each load and line currents. Include the phasor diagram for all currents in your analysis. R Zry Zyt Figure Q2(a) If the transmission line in three phase circuit at Figure Q2(a) has a impedance of 1+j20 for each phase, determine the phase voltages for each load with using an appropriate analysis. Use phase voltage at generator, ERN as a reference. Then determine the total apparent power, active power and reactive power supplied by the generator.