At the beginning of the year, Canary.com bought a shed, a machine, and a trailer. The shed initially cost $20,300 but had to be renovated at a cost of $540. The shed was expected to last 7 years, with a residual value of $1,450. Repairs costing $360 were incurred at the end of the first year of use. The machine cost $1,250, and is estimated to have a total life of 40,000 hours and residual value of $900. The machine was actually used 2,000 hours in year 1 and 4,000 hours in year 2. The trailer cost $11,300 and was expected to last 4 years, with a residual value of $2.000. PB9-1 (Algo) Part 1 Required: 1. Compute the amount to be capitalized for the shed.

At the beginning of the year, Canary.com bought a shed, a machine, and a trailer. The shed initially cost $20,300 but had to be renovated at a cost of $540. The shed was expected to last 7 years, with a residual value of $1,450. Repairs costing $360 were incurred at the end of the first year of use. The machine cost $1,250, and is estimated to have a total life of 40,000 hours and residual value of $900. The machine was actually used 2,000 hours in year 1 and 4,000 hours in year 2. The trailer cost $11,300 and was expected to last 4 years, with a residual value of $2.000. PB9-1 (Algo) Part 1 Required: 1. Compute the amount to be capitalized for the shed.

College Accounting, Chapters 1-27

23rd Edition

ISBN:9781337794756

Author:HEINTZ, James A.

Publisher:HEINTZ, James A.

Chapter18: Accounting For Long-term Assets

Section: Chapter Questions

Problem 4CE: Grandorf Company replaced the engine in a truck for 8,000 and expects the new engine will extend the...

See similar textbooks

Similar questions

Dunedin Drilling Company recently acquired a new machine at a cost of 350,000. The machine has an estimated useful life of four years or 100,000 hours, and a salvage value of 30,000. This machine will be used 30,000 hours during Year 1, 20,000 hours in Year 2, 40,000 hours in Year 3, and 10,000 hours in Year 4. With DEPREC5 still on the screen, click the Chart sheet tab. This chart shows the accumulated depreciation under all three depreciation methods. Identify below the depreciation method that each represents. Series 1 _____________________ Series 2 _____________________ Series 3 _____________________ When the assignment is complete, close the file without saving it again. Worksheet. The problem thus far has assumed that assets are depreciated a full year in the year acquired. Normally, depreciation begins in the month acquired. For example, an asset acquired at the beginning of April is depreciated for only nine months in the year of acquisition. Modify the DEPREC2 worksheet to include the month of acquisition as an additional item of input. To demonstrate proper handling of this factor on the depreciation schedule, modify the formulas for the first two years. Some of the formulas may not actually need to be revised. Do not modify the formulas for Years 3 through 8 and ignore the numbers shown in those years. Some will be incorrect as will be some of the totals. Preview the printout to make sure that the worksheet will print neatly on one page, and then print the worksheet. Save the completed file as DEPRECT. Hint: Insert the month in row 6 of the Data Section specifying the month by a number (e.g., April is the fourth month of the year). Redo the formulas for Years 1 and 2. For the units of production method, assume no change in the estimated hours for both years. Chart. Using the DEPREC5 file, prepare a line chart or XY chart that plots annual depreciation expense under all three depreciation methods. No Chart Data Table is needed; use the range B29 to E36 on the worksheet as a basis for preparing the chart if you prepare an XY chart. Use C29 to E36 if you prepare a line chart. Enter your name somewhere on the chart. Save the file again as DEPREC5. Print the chart.
Grandorf Company replaced the engine in a truck for 8,000 and expects the new engine will extend the life of the truck two years beyond the original estimated life. Related information is provided below. Cost of truck 65,000 Salvage value 5,000 Original estimated life 6 years The truck was purchased on January 1, 20-1. The engine was replaced on January 1, 20-6. Using straight-line depreciation, compute depreciation expense for 20-6.
Dunedin Drilling Company recently acquired a new machine at a cost of 350,000. The machine has an estimated useful life of four years or 100,000 hours, and a salvage value of 30,000. This machine will be used 30,000 hours during Year 1, 20,000 hours in Year 2, 40,000 hours in Year 3, and 10,000 hours in Year 4. Dunedin buys equipment frequently and wants to print a depreciation schedule for each assets life. Review the worksheet called DEPREC that follows these requirements. Since some assets acquired are depreciated by straight-line, others by units of production, and others by double-declining balance, DEPREC shows all three methods. You are to use this worksheet to prepare depreciation schedules for the new machine.
When depreciation is recorded each period, what account is debited? a. Depreciation Expense b. Cash c. Accumulated Depreciation d. The fixed asset account involved Use the following information for Multiple-Choice Questions 7-4 through 7-6: Cox Inc. acquired a machine for on January 1, 2019. The machine has a salvage value of $20,000 and a 5-year useful life. Cox expects the machine to run for 15,000 machine hours. The machine was actually used for 4,200 hours in 2019 and 3,450 hours in 2020.
(Depreciation—Replacement, Change in Estimate) Greg Maddox Company constructed a building at a cost of $2,200,000 and occupied it beginning in January 1998. It was estimated at that time that its life would be 40 years, with no salvage value.In January 2018, a new roof was installed at a cost of $300,000, and it was estimated then that the building would have a useful life of 25 years from that date. The cost of the old roof was $160,000.Instructions(a) What amount of depreciation should have been charged annually from the years 1998 to 2017? (Assume straight-line depreciation.)(b) What entry should be made in 2018 to record the replacement of the roof?(c) Prepare the entry in January 2018 to record the revision in the estimated life of the building, if necessary.(d) What amount of depreciation should be charged for the year 2018?
On January 1, 2014, ABC Company purchased a machine for P504,000 that was placed in service on March 1, 2014. Additional cost incurred to bring the asset to its location and prepare for its intended use were: shipping, P4,000 and installation and testing cost, P6,000. The estimated useful life of the asset was 10 years and has an estimated salvage value of P34,000. What amount of depreciation should be recognized for the year ended December 31, 2014?
On January 2, 2000, the Ajax Plumbing Corporation purchases an automatic soldering machine for $18,000. The Corporation plans to transfer the machine to a subsidiary at the end of 2005 for $11,000. Determine the life of the machine so that the book value at the end 2005 will be $11,000, if the salvage value after L years should be $4,000 using:a. SLMb. DDBM
(Depreciation Computations, SYD) Five Satins Company purchased a piece of equipment at the beginning of 2014. The equipment cost $430,000. It has an estimated service life of 8 years and an expected salvage value of $70,000. The sumof-the-years’-digits method of depreciation is being used. Someone has already correctly prepared a depreciation schedule forthis asset. This schedule shows that $60,000 will be depreciated for a particular calendar year.InstructionsShow calculations to determine for what particular year the depreciation amount for this asset will be $60,000.
Required information [The following information applies to the questions displayed below.] Onslow Company purchased a used machine for $192,000 cash on January 2. On January 3, Onslow paid $8,000 to wire electricity to the machine. Onslow paid an additional $1,600 on January 4 to secure the machine for operation. The machine will be used for six years and have a $23,040 salvage value. Straight-line depreciation is used. On December 31, at the end of its fifth year in operations, it is disposed of. 3. Prepare journal entries to record the machine's disposal under each separate situation: (a) it is sold for $22,500 cash and (b) it is sold for $90,000 cash. View transaction list No 1 2 View journal entry worksheet Date December 31 December 31 General Journal Cash Loss on sale of machinery Accumulated depreciation Machinery Machinery Cash Accumulated depreciation-Machinery Machinery Gain on sale of machinery Debit 22,500 Credit Ⓡ www
R&R, Inc., purchased a new machine on September 1, 2009, at a cost of $180,000. The machine’sestimated useful life at the time of the purchase was five years, and its residual value was $10,000.Instructionsa. Prepare a complete depreciation schedule, beginning with calendar year 2009, under each ofthe methods listed below (assume that the half-year convention is used):1. Straight-line.2. 200 percent declining-balance.3. 150 percent declining-balance (not switching to straight-line).b. Which of the three methods computed in part a is most common for financial reportingpurposes? Explain.
Use the following information for the Exercises below. (Algo) [The following information applies to the questions displayed below.] On April 1, Cyclone Company purchases a trencher for $304,000. The machine is expected to last five years and have a salvage value of $52,000. xercise 8-11 (Algo) Straight-line, partial-year depreciation LO C2 Compute depreciation expense at December 31 for both the first year and second year assuming the company uses the straight-line method. Choose Numerator: Year First year Second year Annual Depreciation 1 1 X Choose Denominator: Fraction of Year ▶II 0 F8 F9 F10 F11
NC purchased a cement mixer for $ 14500. The mixer is expected to have a useful life of five years and a residual value of $ 1000 at the end of that time. Required: Prepare the journal entries to record the disposal of the mixer at the end of second year, assume the straight line depreciation method was used and that: a.It was sold for $ 10000 cash b.It was sold for $ 8000 cash c.It was traded in on a similar mixer ( new) having a list price of $ 16500, a trade in allowance of $ 8000 was given and the balance was paid in cash.