A two-evaporator, multiple EV,and multiple compression refrigeration system uses refrigerant-134a as the working fluid. The system operates evaporator 1 at 0°C, evaporator 2 at -26.4°C, and the condenser at 800kPa. The refrigerant is circulated through the compressor at a rate of 0.1kg/s and the low temperature evaporator serves a cooling load of 8 kW.Determine the cooling rate of the high-temperature evaporator, the power required by the compressor, and the COP of the system. The refrigerant is saturated liquid at the exit of the condenser and saturated vapor at the exit of each evaporator, and the compressor is isentropic.

A two-evaporator, multiple EV,and multiple compression refrigeration system uses refrigerant-134a as the working fluid. The system operates evaporator 1 at 0°C, evaporator 2 at -26.4°C, and the condenser at 800kPa. The refrigerant is circulated through the compressor at a rate of 0.1kg/s and the low temperature evaporator serves a cooling load of 8 kW.Determine the cooling rate of the high-temperature evaporator, the power required by the compressor, and the COP of the system. The refrigerant is saturated liquid at the exit of the condenser and saturated vapor at the exit of each evaporator, and the compressor is isentropic.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter22: Condensers

Section: Chapter Questions

Problem 7RQ: When a standard-efficiency air-cooled condenser is used, the condensing refrigerant will normally be...

See similar textbooks

Similar questions

When a standard-efficiency air-cooled condenser is used, the condensing refrigerant will normally be higher in temperature than the entering air temperature.
Condensers in these refrigerators are all_______cooled.
What are the approximate temperature ranges tor low-, medium-, and high-temperature refrigeration applications?
Define net refrigeration effect as it applies to the refrigeration cycle.
Define flash gas, and explain how it applies to the net refrigeration effect of the refrigeration cycle.
How will oversizing the buffer tank on a water-to-water heat pump system affect the run time of the system?
The condensing pressure is 260 psig and the condenser outlet temperature is 108F for R-22. By how many degrees is the liquid subcooled in the condenser? A. 12F B. 42F C. 7F D. 14F
* 1. A cascade refrigeration system using R - 22 in the low - temperature circuit and ammonia (R - 717) in the high - temperature circuit has a load of 150 kW. The low - temperature circuit operates at an evaporating temperature of -50°C and a condensing pressure of 500 kPa. Refrigerant leaves the low temperature evaporator as saturated vapor and enters the suction of the low - mperature compressor at - 45°C. Liquid refrigerant exits the condenser at 02°C. The high temperature circuit operates at an evaporating temperature of -10°C and a condensing pressure of 1200 kPa. The refrigerant exits both evaporator and condenser at saturated conditions. Calculate the power input to the low-temperature circuit compressor, kW.
A two-evaporator, multiple EV,and single compression refrigeration system uses refrigerant-134a as the working fluid. The system operates evaporator 1 at 0°C, evaporator 2 at -26.4°C, and the condenser at 800kPa. The refrigerant is circulated through the compressor at a rate of 0.1kg/s and the low temperature evaporator serves a cooling load of 8 kW.Determine the cooling rate of the high-temperature evaporator, the power required by the compressor, and the COP of the system. The refrigerant is saturated liquid at the exit of the condenser and saturated vapor at the exit of each evaporator, and the compressor is isentropic.
An ideal multi pressure refrigeration system consists of 57 tons HP Evaporator at 9°C and 63 tons LP Evaporator at -26°C. The system uses 2-stage compression with intercooler with flash tank for the purpose of minimum works on compressors. A pressure reducer valve is installed after the HP Evaporator to equalize its pressure to that of intercooler. The condenser pressure is 40°C. The refrigerant is R22 DETERMINE: (a) intercooler pressure (b) enthalpy leaving condenser (c) enthalpy entering HP Evaporator
The required refrigeration capacity of a vapor compression refrigeration system (with R-22 as refrigerant) is 100 kW at –30oC evaporator temperature. Initially the system was single-stage with a single compressor compressing the refrigerant vapor from evaporator to a condenser operating at 1500 kPa pressure. Later the system was modified to a two- stage system operating on the cycle shown below. At the intermediate pressure of 600 kPa there is intercooling but no removal of flash gas. Find: a) Power requirement of the original single-stage system; b) Total power requirement of the two compressors in the revised two-stage system.
5. A refrigeration system using R-12 as refrigerant consists of throe evaporators of capacities 20 TR at – 5°C, 30 TR at 0°C and 10 TR at 5°C. The vapours leaving the three evaporators are dry and saturated. The system is provided with individual compressors and multiple expansion valves. The condenser temperature is 40°C and the liquid refrigerant leaving the condenser is saturatoed. Assuming isentropic compression in each compressor, find (a) the mass of refrigerant flowing through cach evaporator, (b) the power required to drive the system, and (c) the C.O.P. of the system. [Ans. 27.4 kg/min, 42.25 kg/min: 34.12 kg/min; 38.4 kW; 5.56]