6.2 Derive the expression for the maximum deflection of a simply supported beam of negligible weight carrying a point load at its mid-span position. The distance between the supports is L, the second moment of area of the cross-section is I and the modulus of elasticity of the beam material is E. The maximum deflection of such a simply supported beam of length 3 m is 4.3 mm when carrying a load of 200 kN at its mid-span position. What would be the deflection at the free end of a cantilever of the same material, length and cross-section if it carries a load of 100 kN at a point 1.3 m from the free end? [13.4 mm]

6.2 Derive the expression for the maximum deflection of a simply supported beam of negligible weight carrying a point load at its mid-span position. The distance between the supports is L, the second moment of area of the cross-section is I and the modulus of elasticity of the beam material is E. The maximum deflection of such a simply supported beam of length 3 m is 4.3 mm when carrying a load of 200 kN at its mid-span position. What would be the deflection at the free end of a cantilever of the same material, length and cross-section if it carries a load of 100 kN at a point 1.3 m from the free end? [13.4 mm]

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

6.. A cantilever beam is 2.5 m long, and carries a concentrated load of 380 N at its midpoint, and a uniformly distributed load of 400 N/m over a span from its free end to a point 0.5 m from the free end. Neglecting the mass of the beam itself, draw the shear force and bending moment diagrams for the beam. Show all calculations as well
3. A beam is loaded as shown. El is constant. The vertical reactions at B and C are equal to 80kN. For items a, b and c, use the coordinate system shown, with x=0 at point A. a. Derive the moment function, M(x), in terms of El, using Macaulay Functions. b. Derive the slope function, 0(x) in terms of El. c. Derive the deflection function, y(x) in terms of El. The modulus of elasticity is 200 GPa. d. Determine the required moment of inertia, I, if i. The absolute value of the maximum deflection should not exceed 6mm; and ii. The absolute value of the slope should not exceed 0.01 radians at А. 40 kN 40 kN 10 kN/m A B 2 m 8 m 2 m
A beam ABCDEF is 10 m long and is supported at points B and E which are 2 m and 9 m respectively from A towards the left-hand end. The beam carries a concentrated load of 10kN at A, a concentrated load of W kN at C, which is 5 m from A, and a concentrated load of 16 kN at D which is 4 m from point F. In addition a beam carries a uniformly distributed load of 4 kN/m from A to C and uniformly distributed load of 3 kN/m from D to F. 1.Calculate the position of the other point of contraflexure.
3. A beam ABCDE is 16 m long and is simply supported at A and D 14m apart. At B, 4 m from A, there is a concentrated load of 30kN and a uniformly distributed load of 5kN is carried over the position AC which is 10 m long. A further concentrated load of 10KN is carried at E on an overhang 2 m from D. Draw the shear force and bending moment diagrams indicating the maximum values on each. (OF
Derive the expression for the maximum deflection of a simply supported beam of negligible weight carrying a point load at its mid-span position. The distance between the supports is L, the second moment of area of the cross-section is I and the modulus of elasticity of the beam material is E. The maximum deflection of such a simply supported beam of length 3 m is 4.3 mm when carrying a load of 200 kN at its mid-span position. What would be the deflection at the free end ofacantilever of the same material, length and cross-section if it carries a load of l00kN at a point 1.3m from the free end?
2. A simply supported rectangular concrete beam of span 8m has to be prestressed with a force of 1600 kN. The tendon is of parabolic profile having zero eccentricity at the supports. The beam has to carry an external uniformly distributed load of intensity 30 kN/m. Neglecting the self- weight of the beam, the maximum dip (in meters, up to two decimal places) of the tendon at the mid-span to balance the external load should be? Span of the beam, L = 8m Prestressing force, P = 1600 kN %3D U.D.L. on the beam, w = 30 kN/m Maximum dip of tendon to balance the external load e = ?
Q. 1. A simply supported wood bam AB with span length L=4 m carries a uniform load of intensity o = 5.8 kN/m. Self weight of the beam is negligible. Draw the shear force diagram and bending moment diagram for the beam A
A beam ABCDEF is 10 m long and is supported at points B and E which are 2 m and 9 m respectively from A towards the left-hand end. The beam carries a concentrated load of 10 kN at A, a concentrated load of W kN at C, which is 5 m from A, and a concentrated load of 16 kN at D which is 4 m from point F. In addition a beam carries a uniformly distributed load of 4 kN/m from A to C and uniformly distributed load of 3 kN/m from D to F. 1.1 Draw a free body diagram showing expression from the above statement 1.2 Calculate the magnitude of W if a point of contraflexure is 3 m from A. 1.3 Calculate the magnitude of the reactions at B and E 1.4 Draw the shear force and bending moment diagrams showing all relevant values. 1.5 Calculate the position of the other point of contraflexure
A beam ABCDEF is 10 m long and is supported at points B and E which are 2 m and 9 m respectively from A towards the left-hand end. The beam carries a concentrated load of 10 kN at A, a concentrated load of W kN at C, which is 5 m from A, and a concentrated load of 16 kN at D which is 4 m from point F. In addition a beam carries a uniformly distributed load of 4 kN/m from A to C and uniformly distributed load of 3 kN/m from D to F. 1.4 Draw the shear force and bending moment diagrams showing all relevant values. 1.5 Calculate the position of the other point of contraflexure
Situation 2 | Beam ABCDEFG below is subjected to multiple loads as show. The total length of the beam is 10m. Analyze the beam completely. 6 kN 10 kN 3 kN/m 2 kN 5 kN-m G 3000mm. 1000mm 1000mm. 2000mm. 1000mm 2000mm.
Example 1: The simply supported beam in Fig. (a) carries two concentrated loads. (1) Derive the expressions for the shear force and the bending moment for each segment of the beam. (2) Draw the shear force and bending moment diagrams. Neglect the weight of the beam. Note that the support reactions at 4 and D have been computed and are shown in Fig. (a). 14 KN 28 kN -2 m 3 m 2 m C D. R, = 18 kN Rp = 24 kN {a)
A uniformly distributed load of 2.2 KN/m is supported by two beams arranged as shown below. Beam AB is fixed at the wall and beam CD is simply supported. Before the load is applied, the beams are in contact at B, but the reaction at B is zero. Each beam is 62.5 mm wide by 90 mm high. The modulus of elasticity of the material is 8.25 GPa. Determine (a)The deflection at B when the load is applied.(b)The maximum bending stress in beam AB.(c)The maximum shearing and bending stress in beam CD.