Answered: 1 . A horizontal curve has a PI at…

1 . A horizontal curve has a PI at station 352+40.00, ? = 30 degrees, R = 550 ft. What are the stations of PC and PT, and the length of the curve?

Traffic and Highway Engineering

5th Edition

ISBN:9781305156241

Author:Garber, Nicholas J.

Publisher:Garber, Nicholas J.

Chapter15: Geometric Design Of Highway Facilities

Section: Chapter Questions

Problem 7P

See similar textbooks

Related questions

Q: What is the maximum steepness (H/L, where H is the wave height and L is the wavelength) for a wave…

Q: efficient of consolidation (C) for this clay was found to be 0.544x10-² ompute the ultimate…

A: Given:-drainage settles=10cm in 5 yearCv=0.544 x 10 -2cm2/sec60% of this amountTo find:-Ultimate…

Q: Explain Randomly Oriented Fiber Composites.

A: In the development and production of advanced composite materials (ACM) and fiber-reinforced…

Q: Question - It was decided to construct a fabric filter, using bags of 0.45 m diameter and 7.5 m…

A: Given- Diameter of bags D=0.45 m, Length L=7.5 m, Rate of airflow=10 m3/s, Filtering velocity V=2…

Q: vels on river and canal waterways. Below of 10 m deep and 34 m wide is enclosed . If the gates are…

A: Given Width =34m Depth =10m

Q: Determine the absolute maximum shear and moment in a simply supported bridge deck from AASHTO HS-20…

A: A simply supported bridge of span 100 ft, is loaded by a moving truck moving from right to left,…

Q: Discuss the structural components of a flexible pavement

Q: 1. What is PPP and why is it becoming a more popular way of delivering infrastructure projects?

A: Note:- Hi! Thank you for the question As per the honor code, We’ll answer the first question since…

Q: 3. The following questions refer to the set of differential leveling notes shown in Table 2. a.…

A: Leveling The goal of levelling, a subset of surveying, is to establish, confirm, or measure a…

Q: 1. A semicircular gate (A-B) is hinged along the shaft at the bottom (B) of a water reservoir…

A: Given, Density of water = 1000 kg/m^3 Total height of water = 25 ft…

Q: A 100% saturated soil has a dry unit weight of 17.5kN/m³, and it's water content is 25%. Required:…

A: Given data:- Dry unit weights of 100% saturated soil is 17.5 kN/m3 Water content in soil is 25%

Q: SOLVE THE DISTANCE AND BEARING OF LINE FA AND COMPUTE THE AREA OF THE LOT USING DMD METHOD.

A: Answer Let us first determine the latitude and departures of line FA We know that for a closed…

Q: Draw the shear and bending moment diagrams for the statically indeterminate beam shown below. Also…

A: Given : Determine the shear and bending moment diagrams and find the support reactions?

Q: 8. For beam presented in Fig. 8, calculate the reactions at the supports under the applied load with…

Q: X coordinate: X = X 2A₁ X₁ +A₂X₂+2A3X3 24₁ +4₂ +243 2x(2.83x0.4)x+(2.44x0.4)x+2x(0.72x0.4)x2.63…

Q: 6-71. Determine the reactions at the supports A, C, and E of the compound beam. A B 3 kN/m -3m-4m fo…

A: Given, A beam,

Q: The asymmetric simple truss is loaded as shown. Determine the reactions at A and D. Neglect the…

A: Objective: To determine the reactions at A and D. The solution for the given problem will include…

Q: Problem: A soil sample has a weight of 130 grams and a volume of 60 cc in its natural state. The…

Q: (1) 2/" 3" 4#9 bood 14" (1) Ec = ? (2) fr=? (3) Mer=? #4 fé = 5 ksi Grade 60 Steel NWC. b=14", h=24"…

A: As per Bartleby's guidelines we are supposed to answer only first three questions. Kindly repost…

Q: The three-hinged arch ACB in the figure is subjected to the loads shown. Determine the reactions at…

A: Given : Determine the reaction at support A and B ?

Q: 2. Determine the magnitude of F1 and its direction so that the resultant of the forces will be zero.…

Q: The 59-kg cylinder is suspended from a clamping collar at C which can be positioned at any…

Q: Determine the volume of a 200-foot by 175-foot concrete slab. The slab is 5 inches thick. Express…

Q: Given: An undisturbed chunk of soil has a wet weight of 73lbs and a volume of 0.65ft³. When dried…

Q: A concrete pipe of 6 m long is used to block flood water from the left to contaminate a pond of oil…

Q: A man wants to measure the atmospheric pressure on the ground floor up to the top floor in this…

A: Aneroid barometer Reception area reading, h1 = 28.89 in. Hg Penthouse reading, h2 = 777 mm Hg The…

Q: The pressure at section (2) shown in the figure below is not to fall below 55 psi when the flowrate…

Q: Answer these civil Engineering Questions What documents describe the design of a construction…

A: Construction documents guide all phases of a construction project, from the look method to allowing…

Q: 6-71. Determine the reactions at the supports A, C, and E of the compound beam. A -3 m O B 3 kN/m 4…

Q: 1. The flow from A to B (pipe 1) is 0.825 cu. m/s. Pipe AB is connected to two parallel branch pipes…

A: As per your questions, you have asked only 3 and 4 solution. Solution is being presented in next…

Q: Problem 5.4 Determine the reactions at the supports, and the tension in each segment of the cable. 6…

A: Given: To find: Reactions at the supports Tension in each segment of the cable

Q: signment 5: Horizontal Curve Calculation: ation +26 3+00 7+00 5+00 5+68 = Station 18+26 signment 6:…

Q: 10. A single well pumps water from a horizontally infinite confined aquifer at a rate of 6 m³/day…

A: Given data:- Rate of flow, Q=6 m3/day Transmissivity, T=50 m2/day Storativity, S=0.0001 Radial…

Q: 37. Determine the available strength of a WT7×15, A992 steel, with the flanges welded to a 1/2 in.…

A: Given: Section: WT 7 x 15 (A992 steel) Length of weld: lw1=5 in lw2=11 in To find: Considering…

Q: Oil (SG = 0.83), with a kinematic viscosity of 0.007 ft²/s, flows in a 3-in.-diameter pipe at 0.47…

Q: Problem 3. For the x-frame shown is hinged at D and on rollers at E. Determine the horizontal and…

A: Given data:-

Q: The rectangular canal shown in the figure below changes to a round pipe of diameter D as it passes…

A: Given: Required: Determine D in terms of b

Q: 4. For beam presented in Fig. 4, calculate the reactions at the two supports under the applied load…

A: First draw the FBD of beam showing external reactions. Then Using equilibrium equations the…

Q: +* 4 m + 2 m * 2 kN 1.5 kN 10 m H B 10 m 3 kN G 10 m 3 kN 10 m FIND ALL THE FORCES IN THE BEAMS AND…

Q: 3 in. 3 in. 4 in. -5 in.

A: Using formula to find centroid

Q: 150 lbs 40% 805 lbs 1000 lbs 16 12 X A. Resolve the 1000-lb-force to its components in s and p-axis.…

A: Given- A particle acted upon by three force of magnitude 1000lbs, 150lbs and 805lbs Required-To…

Q: Q- In a wastewater treatment plant, primary sedimentation tank (PST) designed at an overflow rate of…

A: Given: Surface overflow rate=32.5m3/day/m2. The Length of tank L=32.5m. The Width of tank B=8m. The…

Q: C1. The sample of soil in a permeability test is 50 mm diameter and 120 mm long. The head difference…

A: Given : Dia. of soil sample = 50 mm Length =120 mm Head difference = 105 mm and flow = 150 ml in 5…

Q: A 60 kN/m 2.0 m OB 120 kN.m 3.0 m 30 kN C 3.0 m D

A: Find the slope and deflection using double integration method.

Q: For frame presented in Fig. 3, with distances are in meters, calculate the reactions at the two…

A: To find components of reaction at point a and b

Q: Question The head of water over Centre of orifice of diameter 20 mm is 3 m. The actual discharge…

A: Given- Diameter d=20 mm=0.02 m, Discharge Q=1.45 l.p.s=1.45×10-3 m3/s, Head H=3 m, It is needed to…

Q: Determine the maximum shear and the maximum bending moment for the beam shown. Sketch the shear and…

A: Reference : Structural Analysis, Beam analysis. Given : The beam diagram To determine : Maximum…

Q: 19. MAGNETIC DECLINATION. In 1960 a line had a magnetic bearing of N80 23'E. the At that time the…

A: Answer (19) we are given In 1960 Magnetic bearing of line = N 80o 23' E Magnetic Declination = 3o45'…

Q: Question - It was decided to construct a fabric filter, using bags of 0.45 m diameter and 7.5 m…

A: Fabric filter : A fabric filter, also known as a baghouse, uses fabric filtration to remove…

Q: Determine the vertical displacement of joint A. Each bar is made of steel and has a cross-sectional…

A: Given data E = 200 GPa A = 600 mm2 Find vertical deflection of joint-A using Castigliano's…

Concept explainers

Electronic Spreadsheet

Tabular listing has many advantages ranging from time management to efficient scheduling of tasks. Electronic spreadsheets allow the user to tabulate and analyze data, using its easy-to-use interface. An electronic spreadsheet is a staple application used among accountants, management staff, and IT professionals. It is used in various sectors worldwide for data management. An electronic spreadsheet is a system and computer software that could be used to do numerical computations automatically. Spreadsheet application programs are often organized as a table with rows and columns. Each row and column intersect to form a cell, which may be used to store data. These data can take the form of a written label, a number, or a formula that combines information from other cells.

Question

Please show me the process and any reference material indicate

1 . A horizontal curve has a PI at station 352+40.00, ? = 30 degrees, R = 550 ft. What are the stations of PC and PT, and the length of the curve?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Trending now

This is a popular solution!

Step by step

Solved in 4 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Consider the curve satisfying y" = 6x and is tangent to the line y = 5-3x at x = 1. What is y(2)? %3D
A -1.10% grade meets a +0.60% grade at station 36+00 and elevation 800.00 ft. The +0.60 grade then joins a +2.40 grade at station 39+00. Determine the elevation at the low point of the curve. Express your answer in feet to six significant figures. 15. ΑΣΦ Elev = Submit Part B Request Answer Determine the station at the low point of the curve. 35+40.763 36+44.763 38+42.763 vec 36+42.763 D ? ft
%3D A horizontal curve has a radius of 980.80 ft.; an I = 23°00'00"; and, PC Station %3D 76+68.50 ft. Determine: • Deflection angle from the PC to station 79+00.00 ft. = Provide the answer in degrees, minutes, and seconds. Provide whole numbers and do not include units. • Chord length from the PC to station 79+00.00 ft.= Provide your answer to two decimal places and do not include units. • Straight line distance from the PC to the PI = Provide %3D your answer to two decimal places and do not include units.
1. Draw a simple horizontal curve label the curve and define each term 2. For the curve data shown calculate deflection angles also tabulate and show all necessary calculationsalso briefly explain layout method based on your resultsI= 42° 16’ 00” D= 4° 0’ 0”, PI station =93+62.71 3- Highway curve with R = 1000ft ,I = 60° 00’ 00”and PI =85+40Complete the curve calculations showing all details
A horizontal curve is being designed around a pond with a tangent length of 800 ft and central angle of 0.6109 radians. If the PI is at station 85 + 00, determine the station of PT. A. 97 + 35 B. 92 + 50 C. 89 + 75 D. 101 + 45
please include illustrations. ASAP Traverse lines MN, NO, OP are center lines of a portion of a proposed highway. Respectively the bearings and distances are; MN due North, 277.60 m; NO N26°40°E, 107 m; OP N 61°40° E, 200 m. A previously designed compound curve connected these three tangent lines with the PCC at a station 2+012.00. It is desired to revise the system into a single circular curve that will still be tangentto the three lines. a. Determine the radius of the simple curveb. Determine the stationing of the new PC if station N is at 1+975c. Determine the stationing of the new PT
Please Handwrite Answer! Horizontal highway curve: Given PI at 95 + 54.78, Δ = 24°28’, and D = 5°30’, compute thedeflections to the nearest second for the full stations (means stations 94+00, 95+00, 96+00, etc.)as well as for the beginning and end of the curve.
Given a simple circular curve, in feet, with the following known information: o | = 25°10'45" Da = 8°15'00" o STA P.I. = 30+89.45 What is the stationing of the C.T.? O 32+39.55 32+39.68 36+97.40 O 33+94.65
Topic: Elements of a Horizontal Simple Circular Curve Question: A simple curve has an l= 38° 12' and D= 70 00'. Calculate the equivalent external distance and middle ordinate of the curve.
A horizontal curve is being designed with tangent length of 850 ft and central angle of 0.7315 radians. If the Pl is at station 215+00, determine the station of PT. A. 222+74 B. 223+50 C. 274+64 D. 271+95
Compute for the length of curve A line of levels was taken at given points on the existing surface as part of a road reconstruction project. Station Points Elevation 2+075 A 104.63m 2+225 B 109.13m 2+550 C 107.29m 2+725 D 103.79m
Plot the traverse listed below: Line AzimuthS AB 208 degrees BC 208 degrees CD 306 degrees DE 306 degrees BD 253 degrees Consider that line A to C is the back tangent and C to E is the forward tangent of the compound curve. Point B is located in the first vertex and D is in the second vertex. The distance of B to C is 112 meters and A to B is two third the distance of point B to D. Solve for total length of the curve from A to E in meters.