Three balanced three-phase loads are connected inparallel. Load 1 is Y-connected with an impedance of400+ j300 /; load 2 is A-connected with animpedance of 2400 + j1800 N/þ; and load 3 is172.8+ j2203.2 kVA. The loads are fed from adistribution line with an impedance of 2 + j16 N/þ.The magnitude of the line-to-neutral voltage at theload end of the line is 18√3 kV. Express your answer in kilovolt-amperes to three significant figures. Enter your answer in rectangular form.-- ΑΣΦΑΣΦ ||1vec?KVARequest AnswerPart BWhat percentage of the average power at the sending end of the line is delivered to the loads?Express your answer in percents to three significant figures.VE ΑΣΦ ↓↑ vec?% delivered =ST=Submit%

Given star connected load is: =400+j300Ω/ϕ Convert delta load in equivalent star. Delta load is 3…

Three balanced three-phase loads are connected in parallel. Load 1 is Y-connected with an impedance of 400 + j300 N/; load 2 is A-connected with an impedance of 2400 + j1800 N/þ; and load 3 is 172.8 + j2203.2 kVA. The loads are fed from a distribution line with an impedance of 2 + j16 N/p. The magnitude of the line-to-neutral voltage at the load end of the line is 18√3 kV.

Three balanced three-phase loads are connected in parallel. Load 1 is Y-connected with an impedance of 400 + j300 N/; load 2 is A-connected with an impedance of 2400 + j1800 N/þ; and load 3 is 172.8 + j2203.2 kVA. The loads are fed from a distribution line with an impedance of 2 + j16 N/p. The magnitude of the line-to-neutral voltage at the load end of the line is 18√3 kV.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.14MCQ: The instantaneous power absorbed by the load in a single-phase ac circuit, for a general R LC load...

See similar textbooks

Similar questions

2. Two transformes A and B of ratings 5uokVA and 25okVA. Supplying a load kVA of 750 ato.8Pf lagging. open circunt valtajes are 400V and 410v respectively. Trusfarmn A has 1/ nsistance and 5/ ractance and traugformer B hay 1.$, mesistona and 41 reactance. Find (^) Crossacarent in the seandaries on no.load.ib) the load shared by euch transfarmer Their are
A balanced load is connected in star across a 3 phasec415V 50Hz supply. The load consists of a coil of resistance 25 ohms and inducrance 0.5 henry in paeallel with a purw resistance of 28 ohms and a pure capaciror of 60microfarads capacitance ,in each branch. Calculate a. The line currents? Need full working and answer has to be 9.3A Formola for inductance XL= 2×3.142FL FORMOLA FOR CAPACITOR XC= 1/2×3.142×FC
Two single-phase loads are connected in parallel. The first load is SOMVA with 0.8 lagging power factor, while the second load is 20MVA with 0.6 leading power factor. The resultant apparent power of these two loads is Select one 53.85 MVA 69.43 MVA 70 MVA 30 MVA
A load has a leading power factor. a) Is it a capacitive or inductive load? b) Is the reactive power positive or negative? c) Repeat for a load with lagging power factor
Find out the zero-phase sequence components of the following set of three unbalanced voltage vectors: Va =10cis30° ,Vb= 30cis-60°, Vc=15cis145°" (THIS PROBLEM IS MULTIPLE CHOICE PLEASEE CHOOSE A LETTER BELOW AND PROVIDE YOUR CLEAR SOLUTION!) A 16.809cis-72.579° B 5.603cis72.579° C 16.809cis-47.421° D 5.603cis-47.421°
Given three impedances Z1= 10+j0, Z2= 3+j4 and Z3= 8-j6. Impedance Z2 and Z3 are connected in parallel and the combination is connected in series with Impedance Z1 across 120V single phase 60Hz source. Find the total power drawn by the impedances.
Desian aproblem for wye delta transform adions Determinc the eauivalend resistance between the terminals A andA B.
In a three phase balanced Y-Y system, the source phase currents have a magnitude of 9 A. The magnitude of each load current is Select one: O a. 27 A O b. None of these O c. 22 A O d. 13 A
Calculate "terminal" phase voltage of phases "a" and "c" of generator. Calculate Vab and Vca across the load. Calculate three phase power supplied by the source. ]Calculate three phase power losses.
A balanced load is connected in star across a 3 phasec415V 50Hz supply. The load consists of a coil of resistance 25 ohms and inducrance 0.5 henry in paeallel with a purw resistance of 28 ohms and a pure capaciror of 60microfarads capacitance ,in each branch. Calculate a. The line currents The answer has to be 9.3A
Two delta connected loads are connected in parallel and powered by a balanced Y-connectedsource. The smaller of two loads draws 10 kVA at a lagging power factor of 0.75 and the largerdraws 25 kVA at a leading power factor of 0.8. The line voltage is 400 V. Calculate a) The powerfactor at which the source is operating. b) The total power drawn by the two loads. c) The phasecurrent of each load.
)Two complex loads Z1 and Z2 are connected in parallel and powered by a value voltage effective 7.2 kV and frequency 60 Hz. The first load has a power of 50 kVA and a factor of rear power of 0.9. The second charge has a power of 45 kW and a rear power factorof 0.91. Determine in steady state the kVAR power and the capacity required to correct the Total power factor to a value of 0.97 rear.