5.5-10 During construction of a highway bridge, the main girders are cantilevered outward from one pier toward the next (see figure). Each girder has a cantilever length of 48 m and an I-shaped cross section with dimensions shown in the figure. The load on each girder (during construction) is assumed to be 9.5 kN/m, which includes the weight of the girder. Determine the maximum bending stress in a girder due to this load. 52 mm, 28 mm 2600 mm 620 mm
Q: 2. Thermal Efficiency a. Planet Express Generating Station in New York, NY uses 8720 Btu of energy…
A: Part aQ=8720 BtuP=1kW hrto find efficiency η =?Part bη=43%P=560 MW hr
Q: A damped single-degree-of-freedom vibration system has m= 7 kg, c= 549 Ns/m, and k= 10 kN/m.…
A: In vibrating system, damping ratio represents the degree of dampness provided in the vibrating…
Q: A hydro-electric plant in Loboc, Bohol discharges 12300cfm and reduces the pressure from 2585mm Hg…
A: Unit conversion Q = 12300 CFM = 12300 ft³/min = 12300*(4.719 x 10-4 m³/s) = 5.804 m³/s p₁ = 2585 mm…
Q: The defroster of an automobile functions by discharging warm air on the inner surface of the…
A: Given-Information: L=800mmt=6mmV=70mphT∞,0=0°CNu¯L=0.037ReL0.8Pr1/3k=0.023…
Q: ow much heat and moisture must be added to 8 cubic meter per minute of air at 17 C dry bulb and 35%…
A: The volumetric flow rate of air, V = 8 m3/min The dry bulb temperature of air, Tdb,1 = 17 C The…
Q: Goal: Find the mass of the counterweight necessary to launch a 7g clay ball 3 meters. first, find…
A: Given: Assuming lengths as Length of swing arm = 19 in Length of sling = 10.5 in
Q: A countershaft carrying two V-belt pulleys is shown in the figure. Pulley A receives power from a…
A:
Q: 1. Consider the temperature in a composite wall consisting of materials A,B,C which is shown below.…
A: Given: The three materials given are: A, B, C The temperature profile is given. The top and bottom…
Q: A 'L' shaped post with a cylindrical cross-section is loaded with a concentrated load at its free…
A: Given: To find: State of stress at P1
Q: True/False Statement: Frames and machines can both consist of members with 2 or more forces.…
A: Frame : type of structure that consists of single or multi load carrying member which is stationary…
Q: Castigliano's theorem to determine the magnitude of deflection at midspan for the solid steel b = 7…
A: The dimensions are a=3 in, b=7 in, da=1.125 in, db=1.875 in The distributed load is w=160 lb/in…
Q: Determine the force Pexerted on the twig G. Note that there is a horizontal line of symmetry for the…
A:
Q: A 150-lb crate is released from rest at A. The coefficient of kinetic friction between the crate and…
A: This question is based on the concept of kinematics and Mechanics
Q: The pendulum in (Figure 1) consists of a 1.5-kg disk and slender rods AB and DC which have a mass…
A:
Q: Sorry that's the wrong answer it is 0.62
A: Power coefficient = Cp=0.24 Wind speed = Vw=10.3 m/s Blade length = R = 34 m The power generated by…
Q: Draw Mohr’s circle that describes each of the following states of stress for diagram a, b, c.
A:
Q: Crank AB rotates with a constant angular velocity of 4 rad/s. Determine the angular velocity of link…
A: Given data : Angular velocity of AB, ωAB = 4 rad/s Angle of link AB , θ =40⁰ Length of AB =600…
Q: A cascade refrigeration system uses R22 in the low temp unit and R12 in the high temp unit. The…
A: Given : The power develops is P=28 kW The temperature of refrigeration is Te1=-45°C The evaporating…
Q: The drill shown is jammed in the wall and is subjected to the torque and force shown in the diagram.…
A: According to the given data R=20 N.m F=150N We need to find Normal stress at cross-section point-A
Q: Question 2: In an offset slider-crank mechanism the crank am coupler 13 = 100 mm; and the offset 0 =…
A: The crank length, r=40 mm The coupler length, L=100 mm The offset: a=25 mm
Q: Suppose a flu epidemic has broken out in all math 1215 courses at your school. Assume a total of 24…
A: To find: Number of days when the number of people will reach 768
Q: Describe the safety measures to lessen the dangers that are posed by hazardous materials. Why is it…
A: Hazardous materials :-Hazardous materials refer to substances that can pose a threat to human…
Q: PROBLEM 1 For the beam below, calculate the reactions at A and B and draw its Shear and Moment…
A: The shear force and bending moment diagram. Load diagram: The load diagram is shown below.
Q: A thin, flat plate that is 0.2 m × 0.2 m on a side with rough top and bottom surfaces is placed in a…
A: Given-Information: V=30m/sT∞=20°CTs=80°CQ=2200W To-Determine: Drag Force.
Q: Laminar flow normally persists on a smooth flat plate until a critical Reynolds number value is…
A: Given that, Local heat transfer coefficient for laminar flow, hx, Laminar = (1.74W/m11.5.k)x-0.5…
Q: Q2. A component is made from a metal that is known to be viscoelastic and behaves according to a…
A: εo=0.005εt=0.01B=4.2×10-34/hrPan=3.15σo=55×107 paLc=1000 hrsE=200 GPa
Q: 6.6 Using the appropriate table, determine the indicated property for a process in which there is no…
A: Since you have posted a question with multiple sub-parts, we will solve first three sub- parts for…
Q: The steel bracket below is used to connect the ends of two cables. If the applied force P=1.50kip,…
A: Given data:- the applied force P=1.50 kip diameter 1.5 in To find: The maximum normal stress (ksi)…
Q: Steam drives a turbine with a flow rate of 10000 kg/h. The steam enters the turbine at 60 atm and…
A: m˙=10000 kg/h=2.778 kg/sP1=60 atmT1=300oCV1=40 m/sZ1=3mP2=1 atmV2=250 m/sW=350 kWQ=-50…
Q: Consider a 2-meter simply supported beam with a circular cross section. The beam is subjected to a…
A: Given data:- Length of the beam (L)=2 m Force applied at mid-point (F) =1000 N Bending stress(σb)…
Q: A particle of mass 2.6 kg is attached to two cables CB and CA as shown. it revolves in a horizontal…
A: mass of partical m=2.6kgr=1.3mV=8.45 m/s
Q: 7-54 A gas turbine operating at steady state is shown in Fig. P7.54. Air enters the compressor with…
A:
Q: 3. Determine the tension in each cable and the reactions from the ball-and-socket at D. Include 3…
A:
Q: Use Castigliano's theorem to determine the magnitude of deflection at midspan for the solid steel…
A: The dimensions are a=3 in, b=7 in, da=1.125 in, db=1.875 in The distributed load is w=160 lb/in
Q: One kilogram of air at 100 kPa, 20°C is compressed in a otto cycle with a commpression ratio of 7 to…
A: Otto cycle - One kilogram of air at, P1 =100 kPa, T1 = 20°C = 293 K. commpression ratio (rk )= 7…
Q: Determine the speed (in m/s) with which the load W rises when t = 3.6 seconds, when the system shown…
A:
Q: Air flows through the tube shown in (Figure 1). Assume that air is an ideal fluid. Find the air…
A: d1=2mm=0.002m d2=1cm=0.01m h=10cm=0.1m We need to find (i) Velocity at 1 and 2 (ii) Volume flow rate
Q: An aluminum column with a length of L and a rectangular cross section has a fixed end B and supports…
A: Replace the pinned boundary condition on top with a fixed boundary condition. Given:…
Q: Q.3. For the frame shown in Fig., find all the required equations to find moments by…
A: To Find : All the equation to determine the moment by slope deflection method. Given : The value of…
Q: A skier is going down a hill, in the position shown, he has a velocity of 14 m/s. If her weight is…
A: V=14 m/sW=800Nμ=0.1 Parabolic surface
Q: The slider block has the motion shown. Suppose that r = 130 mm and h = 550 mm. (Eigure 1) Figure B…
A:
Q: duct. Average Nusselt numbers and Reynolds numbers were determined for each experiment and the…
A: Here a chart is given . We will apply least square method to find correlation between Nusselt…
Q: Question 3 Consider 2 which shows a pipe system connecting two reservoirs. The pipe diameter changes…
A: To Find : The hydraulic gradient line and the energy gradient line. Given :
Q: A series of small machine components are moved by means of a conveyor belt that passes over a 6-in.…
A: given r = 6 in VA = 13 in/s aA = 5 in/s²
Q: Problem #1 The two vertical rods attached to the light rigid bar in the figure are identical except…
A: W=5600 lb
Q: Use Castigliano's theorem to determine the magnitude of deflection at midspan for the solid steel…
A: The dimensions are a=3 in, b=7 in, da=1.125 in, db=1.875 in The distributed load is w=160 lb/in…
Q: Use Castigliano's theorem to determine the magnitude of deflection at midspan for the solid steel…
A: To Find : The magnitude of deflection at mid span for the solid steel shaft. Given : Free Body…
Q: The iron-carbon alloy that has carbon more than 2.1 wt.%C is called (cast iron / stainless steel /…
A: Given data:- The iron-carbon alloy carbon percentages = more than 2.1 wt.% To be explained:-The…
Q: 1. Heat transfer is thermal energy in transit due to a spatial difference. 2. Write three types of…
A: “Since you have posted a question with multiple sub-parts, we will provide the solution only to the…
Q: 3: For the beam shown in Figure (3), given INA = 1.- 10 mm, calculate the transverse shearing stress…
A: INA=1×106 mm4 simply supported beam as shown below At left support , sectional area given as shown…
Step by step
Solved in 4 steps with 1 images
- A long re Lai nine: wall is braced by wood shores set at an angle of 30° and supported by concrete thrust blocks, as shown in the first part of the figure. The shores are evenly spaced at 3 m apart. For analysis purposes, the wall and shores are idealized as shown in the second part of the figure. Note that the base of the wall and both ends of the shores are assumed to be pinned. The pressure of the soil against the wall is assumed to be triangularly distributed, and the resultant force acting on a 3-meter length of the walls is F = 190 kN. If each shore has a 150 mm X 150 mm square cross section, what is the compressive stressSegments AB and BCD of beam ABCD are pin connected at x = 10 ft. The beam is supported by a pin support at A and roller supports at C and D; the roller at D is rotated by 30* from the x axis (see figure). A trapezoidal distributed load on BC varies in intensity from 5 lb/ft at B to 2.5 lb/ft at C. A concentrated moment is applied at joint A, and a 40-lb inclined load is applied at the mid-span or CD. (a) Find reactions at supports A, C, and D. (b) Find the resultant force in the pin connection at B. (c) Repeat parts (a) and (b) if a rotational spring(kr= 50 ft-lb/radian ) is added at A and the roller at C is removed.A foot bridge on a hiking trail is constructed using two timber logs each having a diameter d = 0.5 m (see figure a). The bridge is simply supported and has a length L = 4 m. The top of each log is trimmed to form the walking surface (see Fig, b)LA simplified model of the bridge is shown in Fig. g. Each log must carry its own weight w = 1.2 kN/m and the weight (P = 850 N) of a person at mid-span, (see Fig. b). Determine the maximum tensile and compressive stresses in the beam (Fig, b) due to bending. If load h is unchanged, find the maximum permissible value of load ... if the allowable normal stress in tension and compression is 2.5 M Pa.
- A pontoon bridge (see figure) is constructed of two longitudinal wood beams, known as bulks, that span between adjacent pontoons and support the transverse floor beams, which arc called chesses. For purposes of design, assume that a uniform floor load of 7.5 kPa acts over the chesses. (This load includes an allowance for the weights of the chesses and balks.) Also, assume that the chesses are 2.5 m long and that the balks are simply supported with a span of 3.0 m. The allowable bending stress in the wood is 15 MPa. If the balks have a square cross section, what is their minimum required width b^l Repeat part (a) if the balk width is 1.5 b and the balk depth is b; compare the cross-sectional areas of the two designs.Continuous cable A DB runs over a small friction less pulley al D to support beam OABC, which is part of an entrance canopy for a building (see figure}. The canopy segment has a weight W = 1700 lb that acts as a concentrated load in the middle of segment AB. (a) What is the maximum permissible value of load P at C if the allowable force in the cable is 4200 lb? (b) If P = 2300 lb, what is the required diameter of pins A, B, and D? Assume that the pins are in double shear and the allowable shear stress in the pins is 10 ksi.A large precast concrete panel for a warehouse is raised using two sets of cables at two lift lines, as shown in the figure part a. Cable 1 has a length L1 = 22 Ft, cable 2 has a length L2= 10 ft, and the distance along the panel between lift points Band D is d = 14 ft (see figure part b). The total weight of the panel is W = 85 kips. Assuming the cable lift Forces F at each lift line are about equal, use the simplified model of one half of the panel in figure part b to perform your analysis for the lift position shown. Find the required cross-sectional area AC of the cable if its breaking stress is 91 ksi and a factor of safety of 4 with respect to failure is desired.
- Two pipe columns (AB, FC) are pin-connected to a rigid beam (BCD), as shown in the figure. Each pipe column has a modulus of E, but heights (L1or L2) and outer diameters (d1or different for each column. Assume the inner diameter of each column is 3/4 of outer diameter. Uniformly distributed downward load q = 2PIL is applied over a distance of 3L/4 along BC, and concentrated load PIA is applied downward at D. (a) Derive a formula for the displacementA hollow box beam is constructed with webs of Douglas-fir plywood and flanges of pine, as shown in the figure in a cross-sectional view. The plywood is 1 in. thick and 12 in. wide; the flanges are 2 in. × 4 in. (nominal size). The modulus of elasticity for the plywood is 1,800,000 psi and for the pine is 1,400,000 psi. If the allowable stresses are 2000 psi for the plywood and 1750 psi for the pine, find the allowable bending moment Mmaxwhen the beam is bent about the z axis. Repeat part (a) if the beam is now bent about its y-axis.A plane truss is subjected to loads 2P and P at joints B and C, respectively, as shown in the figure part a. The truss bars are made of two L 102 X 76 X 6.4 steel angles (see Table F-5(b): cross-sectional area or the two angles, A = 2180 mm2, and figure part b) having an ultimate stress in tension equal to 390 MPa. The angles are connected to a 12-mm-thick gusset plate at C(figure part c) with 16-mm diameter rivets; assume each rivet transfers an equal share of the member force to the gusset plate. The ultimate stresses in shear and bearing for the rivet steel are 190 MPa and 550 MPa, respectively. Determine the allowable load Pallowif a safety factor of 2.5 is desired with respect to the ultimate load that can be carried. Consider tension in the bars, shear in the rivets, bearing between the rivets and gusset plate. Disregard friction between the plates the bars, and also bearing between the rivets and the and the weight of the truss itself.
- Two flat beams AB and CD, lying in horizontal planes, cross at right angles and jointly support a vertical load P at their midpoints (see figure). Before the load P is applied, the beams just touch each other. Both beams are made of the same material and have the same widths. Also, the ends of both beams are simply supported. The lengths of beams AB and CD are LABand LCD, respectively. What should be the ratio tABltCDof the thicknesses of the beams if all four reactions arc to be the same?An overhanging beam ABC has a guided support at A, a rectangular cross section, and supports an upward uniform load q = PtL over AB and a downward concentrated load P at the free end C {see figure). The span length from A to B is L, and the length of the overhang is L12. The cross section has a width of A and a height A. Point D is located midway between the supports at a distance d from the top face of the beam. Knowing that the maximum tensile stress (principal stress) at point Z> is tr, = 38 MPa, determine the magnitude of the load P. Data for the beam are L = 1.75 m, b = 50 mm, // = 220 mm, and d = 55 mm.Each girder of the lift bridge (sec figure) is 180 ft long and simply supported at the ends. The design load for each girder is a uniform load of intensity 1,6 kips/ft. The girders are fabricated by welding three steel plates to form an I-shaped cross section (see figure) having section modulus S = 3600 in3. What is the maximum bending stress rmaxin a girder due to the uniform load?