I need answer within 20 minutes please please with my best wishes 11) In water jet cutting and abrasive water iet cutting, the separation between the nozzle opening and the worksurtace is called which one of the following: (A) gap, (B) gap size. (C) orifice, (D) overcut, or (E) standoff distance.F) None of the previous.12)in Eloctron beam machining, as the electrons strikes the work piece: - A) Electro-chemical etching takesplace. B) They get scattered. C) Mechanical erosion in work piece takes place. D) Their kinetic energy isconverted into heat.13)In chemical machining, a layer of maskant is used on the work part Inorder to:electricity. B) protect the work part from reagent. C) make a hole on the work part. D) make a chemicalA) protect the work part fromreaction with water.E) making the work part to be an anode. F) making the work part to be a cathode.14) In electrochemical machining. the electrode is fed into the work at e rate - the rate of metal removal fromthe work. A) Higher than.previous.15) In Ultrasonic Machining, the tool oscillation angle in the work piece is: A) Zero". B) 45°.E) None.16)Which of the following processes use mechanical energy as the principal energy source: (A) chemicalmachining. (B) EDM. (C) laser beam machining.(F) wire EDME) None of theB) Lower than. C) Equal to. D) No electrode is used.C) 90° D) 180°.D) water jet cutting. E) electron beam machiningI) none of the previous answers.17) Which one of the following is closest to the temperatures used in plasma arc cutting: A) 2750 °C. B) 5500 °CG) Plasma arc cutting.H) Electron beam machining.C) 8300 °CD) 11,000 °CE) 19,000 °C.F) room temperature.

As per bartleby guidelines we are allowed to solve only 1st 3 subparts if multiple subparts are…

11) In water jet cutting and abrasive water jet cutting, the separation between the nozzle opening and the work F) Non called which one of the following: (A) gap. (B) gap size. (C) orifice, (D) overcut, or (E) standoff distance of the previous. 12) In Electron beam machining, as the electrons strikes the work piece: - A) Electro-chemical etching takes place B) They get scattered. C) Mechanical erosion in work piece takes place. D) Their kinetic energy is converted 13) In chemical machining, a layer of maskant is used on the work part Inorder to: electricity. B) protect the work part from reagent. E) making the work part to be an anode. F) making the work part to be a cathode. A) protect the work part from C) make a hole on the work part. D) make a chemical reaction with water. 14) In electrochemical machining the plotras remount from

11) In water jet cutting and abrasive water jet cutting, the separation between the nozzle opening and the work F) Non called which one of the following: (A) gap. (B) gap size. (C) orifice, (D) overcut, or (E) standoff distance of the previous. 12) In Electron beam machining, as the electrons strikes the work piece: - A) Electro-chemical etching takes place B) They get scattered. C) Mechanical erosion in work piece takes place. D) Their kinetic energy is converted 13) In chemical machining, a layer of maskant is used on the work part Inorder to: electricity. B) protect the work part from reagent. E) making the work part to be an anode. F) making the work part to be a cathode. A) protect the work part from C) make a hole on the work part. D) make a chemical reaction with water. 14) In electrochemical machining the plotras remount from

Welding: Principles and Applications (MindTap Course List)

8th Edition

ISBN:9781305494695

Author:Larry Jeffus

Publisher:Larry Jeffus

Chapter24: Welding Codes And Standards

Section: Chapter Questions

Problem 8R: What is a WPS?

See similar textbooks

Similar questions

-Illustrate the process of the Water Jet Machining (WJM) system compare to EDM (Electrical Discharge Machine) wire cutting in term of cutting operation.
Only ítem B) a) select the diameter of the cylinder to be used from L=150mm, if it is required to apply a force of 350 kg for a pneumatic die-cutting press. use the SMC analytical mathematical calculation method, clearly indicating the considerations and criteria used in the calculation. P=80psi b) The press will be activated 6 times per minute, neglecting the consumption of the hoses, determine the air consumption per minute required by the system. c)Make the pneumatic diagram for the operation of said press, the application will be with pneumatics pure and as it has no guard it is required that the press be activated using 2 hands safely Explain how it works and describe its components.
Problem 1. (Electrochemical Machining) An ECM operation is used to cut a hole into a plate of stainless steel that is 10 mm thick. The hole has a rectangular cross section, 15 mm by 25 mm. The operation is accomplished at a current = 1300 amps. Efficiency is 97%. Determine the feed rate and time to cut through the plate. The specific removal rate C for stainless steel = 2.46 x 10-² mm³/A-s. Problem 2. (Electric Discharge Machining) Iron is to be machined in an EDM operation. If discharge current = 30 amps, what is the expected metal- removal rate? The melting point of iron is known to be 1539°C, and the metal removal rate constant of proportionality K = 664 in Sl units (5.08 in U.S. customary units)
(Electrochemical Machining) An ECM operation is used to cut a hole into a plate of stainless steel that is 10 mm thick. The hole has a rectangular cross section, 15 mm by 25 mm. The operation is accomplished at a current = 1300 amps. Efficiency is 97%. Determine the feed rate and time to cut through the plate. The specific removal rate C for stainless steel = 2.46 × 10-2 mm3/A-s. R - V = CIt I = V = gr A V At fr EA gr C(EAt) gr fr CI A CE gr Typical values of specific removal rate C' for selected work materials in electrochemical machining. Compiled from data in [11]. Specific Removal Rate C Materialª mm³/amp-sec (in³/amp-min) Materialª Aluminum (3) Copper (1) Iron (2) Nickel (2) 3.44 x 10-2 7.35 × 10-2 3.69 × 10-2 (1.26 × 10-4) (2.69 x 10-4) (1.35 × 10-4) 3.42 × 10-2 (1.25 × 10-4) X Low alloy steel High alloy steel Stainless steel Titanium (4) Specific Removal Rate C mm³/amp-sec (in³/amp-min) (1.1 × 10-4) 3.0 x 10-2 2.73 × 10-2 2.46 × 10-2 (1.0 × 10-4) (0.9 × 10-4) 2.73 x 10-2 (1.0 ×…
1. Most common instrument used in the mechanical gages is the dial indicator, which of the following applications cannot be measured by the dial indicator? (a) All of them (b) Perpendicularity (c) Runout (d) Circularity (e) Roughness 2. The main mechanism for the flank wear on the single point cutting tool is: (a) Oxidation wear (b) Adhesion wear (c) None of them (d) Diffusion wear (e) Plastic deformation 3. Higher cutting speeds and temperatures are the main mechanism of the following tool wear mechanism: (a) Diffusion wear (b) Abrasion wear (c) None of them (d) Adhesion wear (e) Plastic Deformation
ing the work part to be an anode. 14) In electrochemical machining, the electrode is fed into the work at a rate ---------- the rate of metal removal from F) making the work part to be the work. A) Higher than. B) Lower than. C) Equal to. D) No electrode is used. E) None of the previous. 15) In Ultrasonic Machining, the tool oscillation angle in the work piece is: A) Zeroº. B) 45⁰. C) 90⁰. D) 180º. E) None. 161108
After finding shear rate and shear stress in cgs units, a) repeat using SI units
I need 5-10 lines about Water Jet pressure Pump that is the part of Abrasive water jet cutting mechine. I am taking research please help me what i can doo in it ?
How does an Electrical Discharge Machining remov material from work piece?
The break-even Revenue (at no profit) of a mine is $70M per tonne of ore. It costs $46M per tonne of ore to produce the ore mineral and it costs $3M per tonne of waste to extract and handle the waste. (i) Calculate the BESR. (il)) What would be the profit/lass per tonne of ore, if the mine management decided to change (reduce or increase) the stripping ratio to 3.1?
3. Electrode This is usually made of graphite, brass, copper and copper tungsten alloys and is needed in electrical-discharge machining to create spark with an electrically charged workpiece. a. Dielectric fluid b. Electrolyte c. Electrode d. Wire 4. Mechanical Which of the following is NOT included in the energy sources utilized in advanced machining. a. Chemical b. Electrical c. Laser d. Mechanical 5. In performing electrochemical machining , the following are necessary in the process except. a. Electrolyte b. Power supply c. Shaped tool d. Dielectric fluid
Rice Mills What are the indices for efficient milling?